Abstract:Recently a contact solid carburization method to fabricate carbide coatings on refractory metals was proposed. The principle is to hot-press the refractory metal with a "carbon sponge" (e.g. cast iron or high-carbon steel) which contains interstitial carbon atoms. When they contact in atomic scale at high temperatures, the carbon atoms diffuse into the refractory metal matrix and then dense carbide coatings on the substrates can be obtained since most refractory metals are carbide forming elements. In this article, we apply this method to prepare carbide coating on molybdenum (Mo). Cast iron is used as the "carbon sponge" and hot-pressed with textured Mo at constant temperature and pressure (18 MPa). We set the temperature at 1100 degrees C and 900 degrees C separately, we found that coatings containing Fe-Mo-C layer and Mo-C layer are generated at 1100 degrees C while coatings containing only Mo-C layer are formed at 900 degrees C. We then hot-pressed the samples at 900 degrees C for 2-10 h and systematically investigated the microstructure and some basic properties of the coatings obtained at 900 degrees C. The coating grows inward, it is pure ceramic and completely dense. The coating is composed of columnar Mo2C grains whose grain orientations are randomly distributed. The metal and carbide phases are metallurgically bonded with incoherent interfaces. The coating thickness reaches 1.8 mu m when annealed for 10 h. As expected, the surface hardness is remarkably improved and the coating adhesion is strong. This technique is also expected to be used to improve the wear resistance, oxidation resistance for molybdenum and Mo based alloys and may also provide a new strategy to prepare Mo2C superconductors and catalysts.

A new strategy for preparing carbide coatings on easily oxidized tantalum by non-vacuum carburizing: Fe-coating-mediated carburization

Fabrication of TaC Coating on Tantalum by Interstitial Carburization

Fe-coating-mediated carburization: A new strategy for fabricating a tungsten carbide coating on tungsten

A New Strategy to Efficiently Fabricate Tungsten Carbide Coating on Tungsten: Two-step Interstitial Carburization

New strategy to grow TiC coatings on titanium alloy: Contact solid carburization by cast iron

Enhancing High-Temperature Oxidation Resistance of Tantalum-Tungsten Alloy with Composite Coating

Research progress on tantalum carbide coatings oncarbon materials

Orthogonal Experimental Optimization of Preparation and Microstructural Properties of a Diffusion Barrier for Tantalum-Based Silicide Coatings

Fabrication of Mo2C Coating on Molybdenum by Contact Solid Carburization

Influence of Tantalum Addition on the Microstructure and Wear Resistance Properties of NiCuBSi/65WC Composite Coatings

Additive manufacturing of tantalum-zirconium alloy coating for corrosion and wear application by laser directed energy deposition on Ti6Al4V

Chemical Vapor Deposition of Tantalum Carbide in the TaBr5–CCl4–Cd System

High-temperature resistance and self-lubricating TiAlTaCN nanocomposite hard coating by synergistic interaction of TiAlN(C) and TaN(C) phases

Effect of Vacuum Carburizing Time on Microstructure and Mechanical Properties of Tantalum Carbide Layer

Tantalum Coating Prepared by APCVD and In-Vivo Biological Evaluation

Study on Deposition of Biomedical Ta Coating on Ti6Al4V Alloy Substrate by CVD and Its Properties

Effect of TaC content on microstructure and wear behavior of PRMMC Fe-TaC coating manufactured by electrospark deposition on AISI304 stainless steel

Oxidation resistant graded multiphase coating for carbon/carbon composites

Low‐temperature synthesis and oxidation resistance of random combination of Hf, Nb, and Ta carbides microcuboids

An efficient salt-thermo-carburizing method to prepare titanium carbide coating

Structural characteristics and outward–inward growth behavior of tantalum oxide coatings on tantalum by micro-arc oxidation