Abstract:In response to the National Development and Reform Commission's "Guiding Opinions on Comprehensive Utilization of Large Solid Wastes during the Fourteenth Five Year Plan", further expand the use of steel slag as concrete admixture in construction projects and other fields, and gradually improve the comprehensive utilization ratio, a cementitious composite with high utilization of steel slag (CHS) was developed, which is with the cement replaced by high-content super-fine steel slag powder (SSP) (replacement ratio υ ≥ 30%) as the cementitious materials, steel slag sand (SS) as the only aggregate and environmentally basalt fiber (BF) for toughening. It improves the utilization percentage of steel slag (SSP and SS) and reduces the consumption of natural resources such as cement and natural sand. Use BF to achieve better strength and toughness. In order to better understand the performance of CHS and make it better used in the engineering field. Study the influence of each component on the strength and energy consumption of compression and splitting tension, and strive to find the optimal proportion and lay the theoretical foundation for its application. Through the tests, the effects of high replacement ratio υ (30%–50%), low binder-aggregate ratio γ (0.31–0.44), and BF content ρ v (0%–2%) on the aspects of peak strength, force-deformation curve and energy consumption were analyzed. The results show that the standard curing f ck and f t,s can reach 40 MPa and 5 MPa respectively. With the increase of υ , the maximum axial compressive strength f ck and splitting tensile strength f t,s decreased insignificantly. The γ has an important influence on f ck and f t,s . When it increases from 0.31 to 0.44, f ck increases linearly by 63.1% to 40.4 MPa, while f t,s increases by 52.8% to 5.18 MPa. As ρ v increases, f ck and f t,s show a trend of first increasing and then decreasing. ρ v exerts a significant impact on the descending segments of stress-strain response curves of the compression which expressed as bilinear and trilinear models with different ρ v after normalization. The energy consumptions of peak, total, and residual ( E peak , E disp , E res ) show a slight downward trend with the increase of υ , a significantly upward trend with the increase of γ . With the increase of γ v , and E disp increase first and then tend to be flat, while E res always increases and the percentages of E res / E disp in the compressive test increase from 22.6% to 38.5%, reflecting the improvement of the compressive toughness of BF.

Effect of Freeze-Thaw Cycle and Moisture Content on Compressive and Energy Properties of Alkali Slag Ceramsite Concrete

Study of Mechanical Properties and Durability of Alkali-Activated Coal Gangue-Slag Concrete

Experimental Study and Analytical Modeling on Properties of Freeze–Thaw Durability of Coal Gangue Pervious Concrete

Damage Model of Steel Fiber-Reinforced Coal Gangue Concrete under Freeze–Thaw Cycles Based on Weibull Distribution

Optimization of coal-based solid waste ceramsite foam concrete mix proportions and performance study

Mechanical Performances and Frost Resistance of Alkali-Activated Coal Gangue Cementitious Materials

Influence of Ceramsite with Assembly Unit of Sludge and Excavated Soil on the Properties of Cement Concrete

Freezing and thawing cycles: effect on recycled aggregate concrete including slag

Freezing-Thawing Damage Mechanism of Coal Gangue Concrete Based on Low-Field Nuclear Magnetic Resonance, Scanning Electron Microscopy, and N2 Adsorption

Mechanical properties and compressive constitutive relation of solid waste-based concrete activated by soda residue-carbide slag

Study on the Effect of Freeze-Thaw Cycles on Chloride Diffusion Resistance of Copper Slag Reactive Powder Concrete (Csrpc)

Optimizing the Utilization of Steel Slag in Cement-Stabilized Base Layers: Insights from Freeze–Thaw and Fatigue Testing

Multi-Scale Analysis of the Damage Evolution of Coal Gangue Coarse Aggregate Concrete after Freeze–Thaw Cycle Based on CT Technology

Effect of freeze-thaw cycles on the mechanical performance of wheat straw biomass ash modified soil

Mechanical Properties and Stress–Strain Constitutive Relations of Coal-Fired Slag Concrete

The Influence of Slag Content on the Structure and Properties of the Interfacial Transition Zone of Ceramisite Lightweight Aggregate Concrete

Thermal and mechanical properties of coal gasification slag based foam concrete

Macro-mechanical properties and fine scale damage mechanism of carbon fiber-modified recycled coarse aggregate concrete under sodium sulfate-dry-wet and freeze-thaw cycling coupling effects

Compressive-Tensile Mechanics and Energy Consumptions of a Cementitious Composite with High Utilization of Steel Slag

Study on the Properties and Hydration Mechanism of Calcium Carbide Residue-Based Low-Carbon Cementitious Materials

Evaluating the Influence of Carbon Fiber on the Mechanical Characteristics and Electrical Conductivity of Roller-Compacted Concrete Containing Waste Ceramic Aggregates Exposed to Freeze-Thaw Cycling