Abstract:Thermoelectric has long been recognized as a promising technology due to its ability to harvest waste heat from different sources, such as the Sunlight, vehicles, and energy-intensive industries, and thereby convert it into electricity without emitting greenhouse gases, so providing distributed solutions for sustainable energy challenges and energy efficiency issues worldwide. Lead Telluride (PbTe) is the classic thermoelectric material; however, its applications are limited by its low efficiency. The goal of the present research is to improve the energy conversion efficiency of PbTe by mixing single-walled carbon nanotubes (SWCNTs) via simple powder processing and utilizing nanostructuring and quantum confinement effects in a synergistic way. PbTe based composites incorporating different vol% of SWCNTs were fabricated through the high-frequency induction heating furnace at ~450°C. Thermoelectric characteristics of bulk samples were tested at temperatures ranging from ~300 to ~530K. With the inclusion of nanotubes, the electrical conductivity behaviour changes from semi-metallic in pristine PbTe to semi-conducting in composites. This shows that the semiconducting nature of SWCNTs plays a major role in electrical transport. As a result, the composites’ effective electrical conductivities were lowered near room temperature, with the lowest values observed at 0.5 vol% of SWCNTs. When compared to pure PbTe, the Seebeck coefficient of the 0.5 vol% of PbTe composite improves at ambient temperature and gradually drops after ~375K. Thermal conductivity of all the composites reduces and substantial reduction was observed at 0.5 vol% of SWCNTs. The large transition from semi-metallic to semi-conducting transport in pristine PbTe to composites, as well as enhanced short-range carrier scattering, are responsible for lowering electrical conductivity and hence composites’ power factor. As a result, the significant reduction in thermal conductivities could not compensate for the loss of power factor, resulting in lower ZT values from pristine PbTe.

Thermoelectric Properties of Nanocomposite Heavy Fermion CeCu6

Ultrasonic-assisted Hot Pressing of Bi2Te3-based Thermoelectric Materials

Enhanced thermoelectric performance of n -type PbTe bulk materials fabricated by semisolid powder processing

Colloidal Synthesis of Cu2CdSnSe4 Nanocrystals and Hot-Pressing to Enhance the Thermoelectric Figure-of-merit.

The Effect of Doped-Zn on the Low-Temperature Properties of Heavy Electron Compounds Cecu6-Xznx

Transport Properties of Heavy Fermion Compounds

Effect of Starting Powder Particle Size on the Thermoelectric Properties of Hot-Pressed Bi0.3Sb1.7Te3 Alloys

Interface‐Enhanced High‐Temperature Thermoelectricity in Cu1.99Se/B4C Composites with Synergistically Improved Mechanical Strength

Enhanced thermoelectric performance of CuGaTe2 based composites incorporated with nanophase Cu2Se

Thermoelectric Properties of Solution-Synthesized N-Type Bi 2 Te 3 Nanocomposites Modulated by Se: an Experimental and Theoretical Study

High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys

Realizing high figure of merit in heavy-band p -type half-Heusler thermoelectric materials

The Contrast on Low-Temperature Physical Property of Heavy Electron Compounds Cecu5.8 M-0.2 (M = Ni, Zn, Cd)

Enhanced Thermoelectric Properties of the Lu-doped and CNT-dispersed Bi 2 Te 3 Alloy

Effect of electron-phonon scattering, pressure and alloying on the thermoelectric performance of TmCu$_3$Ch$_4$ (Tm=V, Nb, Ta; Ch=S, Se, Te)

Thermoelectric Performance Enhancement of Eco-Friendly Cu2Se Through Incorporating CB4

Thermoelectric Properties of PbTe Based Single-Walled Carbon Nanotube (SWCNT) Composites

Nanoporous PbSe–SiO2 Thermoelectric Composites

Ultralow Thermal Conductivity and High ZT of Cu2Se-based Thermoelectric Materials Mediated by TiO2−n Nanoclusters

Improved Thermoelectric Figure of Merit in N-Type CoSb3 Based Nanocomposites

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in GeTe Alloys via Introducing Cu 2 Te Nanocrystals and Resonant Level Doping