Abstract:In this study, Na as the n‐type dopant is introduced in the polycrystalline Bi2Te3 material for enhancing the thermoelectric and mechanical properties. Benefitting from the synergistic optimization of electrical and thermal transport properties, a maximum ZT value of 1.03 is achieved at 303 K for the Bi2Te3‐0.25 wt% sample, which is 70% higher than that of the pristine sample. The recent growing energy crisis draws considerable attention to high‐performance thermoelectric materials. n‐type bismuth telluride is still irreplaceable at near room temperature for commercial application, and therefore, is worthy of further investigation. In this work, nanostructured Bi2Te3 polycrystalline materials with highly enhanced thermoelectric properties are obtained by alkali metal Na solid solution. Na is chosen as the cation site dopant for n‐type polycrystalline Bi2Te3. Na enters the Bi site, introducing holes in the Bi2Te3 matrix and rendering the electrical conductivity tunable from 300 to 1800 Scm–1. The solid solution limit of Na in Bi2Te3 exceeds 0.3 wt%. Owing to the effective solid solution, the Fermi level of Bi2Te3 is properly regulated, leading to an improved Seebeck coefficient. In addition, the scattering of both charge carriers and phonons is modulated, which ensured a high‐power factor and low lattice thermal conductivity. Benefitting from the synergistic optimization of both electrical and thermal transport properties, a maximum figure of merit (ZT) of 1.03 is achieved at 303 K when the doping content is 0.25 wt%, which is 70% higher than that of the pristine sample. This work disclosed an effective strategy for enhancing the performance of n‐type bismuth telluride‐based alloy materials.

Enhanced Thermoelectric Properties of the Lu-doped and CNT-dispersed Bi 2 Te 3 Alloy

Thermoelectrical Properties of Lutetium-Doped Bi2Te3 Bulk Samples Prepared from Flower-Like Nanopowders

Enhancing the Thermoelectric Performance of Cu–Ni Alloys by Introducing Carbon Nanotubes

Enhancement of Thermoelectric Figure of Merit for Bi 0.5 Sb 1.5 Te 3 by Metal Nanoparticle Decoration

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles

Enhanced thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles

ChemInform Abstract: Thermoelectrical Properties of Lutetium‐Doped Bi2Te3 Bulk Samples Prepared from Flower‐Like Nanopowders.

Highly Enhanced Thermoelectric and Mechanical Properties of Bi-Sb-Te Compounds by Carrier Modulation and Microstructure Adjustment

Enhanced Thermoelectric Performance of Bi2Te3 Through Uniform Dispersion of Single Wall Carbon Nanotubes

Syntheses and Thermoelectric Properties of Bi2te3/Sb2te3 Bulk Nanocomposites with Laminated Nanostructure

Synthesis and Thermoelectric Properties of Bi2te3 Based Nanocomposites

Enhanced Thermoelectric and Mechanical Properties of p-type Bi0.5Sb1.5Te3 Bulk Alloys by Composite Electroless Plating with Ni&Cu

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Decoupling phonon and carrier scattering at carbon nanotube/Bi2Te3 interfaces for improved thermoelectric performance

Effect of Uniform Dispersion of Single-Wall Carbon Nanotubes on the Thermoelectric Properties of BiSbTe-Based Nanocomposites

(Bi,sb)2te3/sic Nanocomposites with Enhanced Thermoelectric Performance: Effect of SiC Nanoparticle Size and Compositional Modulation

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Nanostructured Bi2-Xcuxs3 Bulk Materials With Enhanced Thermoelectric Performance

BiSbTe-based nanocomposites with high ZT: The effect of SiC nanodispersion on thermoelectric properties

Achieving High Thermoelectric Performance by Introducing 3D Atomically Thin Conductive Framework in Porous Bi2Te2.7Se0.3‐Carbon Nanotube Hybrids

Enhanced Thermoelectric Performance of N-Type PbTe Through the Introduction of Low-Dimensional C60 Nanodots