Abstract:Abstract For disposal of the research reactor of the Technical University Munich FRM II a new transport and storage cask design was under approval assessment by the German authorities on the basis of International Atomic Energy Agency (IAEA) requirements. The cask body is made of ductile cast iron and closed by two bolted lid systems with metal seals. The material of the lids is stainless steel. On each end of the cask the wood-filled impact limiters are installed to reduce impact loads to the cask under drop test conditions. In the cavity of the cask a basket for five spent fuel elements is arranged. This design has been assessed by the Bundesanstalt für Materialforschung und -prüfung (BAM) in view to the mechanical and thermal safety analyses, the activity release approaches, and subjects of quality assurance and surveillance for manufacturing and operation of the package. For the mechanical safety analyses of the package a combination of experimental testing and analytical/numerical calculations were applied. In total, four drop tests were carried out at the BAM large drop test facility. Two tests were carried out as a full IAEA drop test sequence consisting of a 9m drop test onto an unyielding target and a 1m puncture bar drop test. The other two drop tests were performed as single 9m drop tests and completed by additional analyses for considering the effects of an IAEA drop test sequence. The main objectives of the drop tests were the investigation of the integrity of the package and its safety against release of radioactive material as well as the test of the fastening system of the impact limiters. Furthermore, the acceleration and strain signals measured during the tests were used for the verification of finite-element (FE) models applied in the safety analysis of the package design. The FE models include the cask body, the lid system, the inventory and the impact limiters with the fastening system. In this context special attention was paid to the modeling of the encapsulated wood-filled impact limiters. Additional calculations by using the verified numerical model were done to investigate e.g. the brittle fracture of the cask body made of ductile cask iron within the package design approval procedure. The thermal safety assessment was based on analytical energy balance calculations and FE analyses. As an additional point of evaluation in frame of approval procedure, the effect of possible impact limiter burning under accident conditions of transport was considered by the applicant and assessed by BAM. This paper describes the package design assessment from the point of view of the competent authority BAM including the applied assessment strategy, the conducted drop tests and the additional calculations by using numerical and analytical methods.

The study on the wood candidates for the impact limiter of a spent fuel cask

Study on the Impact Limiter Design in Spent Fuel Transfer Cask in Nuclear Power Plants

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

Effect of material properties of impact limiter steel on drop accident of spent nuclear fuel transport cask

Study on the Structural Evaluation and Optimization of Spent Nuclear Fuel Cask

Study on horizontal dynamic response of engineering structures with buffer-layer under impact action of fuel container

Investigation and Design of Energy-Absorbing Structure in Nuclear Fuel Cask

Preparation and Properties Study of Wood-Based Cushioning Materials

Impact responses and residual flexural properties of narrow CFRP laminates

Axial mechanical properties of welded orthogonal trapezoidal aluminum honeycomb as filler material for nuclear equipment impact limiter

Interface Delamination Damage Mechanism of Paulownia Wood Sandwich Beams under Low-velocity Impact

Weibull Distribution-Based Prediction Model for Compression after Impact (CAI) Strength of CFRP Laminates

An analytical model to predict the impact of a bullet on ultra-high molecular weight polyethylene composite laminates

Crushing mechanical responses of natural wood columns and wood-filled composite columns

Finite Element Analyses on the Soft Projectile Impact Testing of a Wall-floor-wall Reinforced Concrete Structure

An environment-friendly, fire-resistant, thermal-insulating and mechanical-robust wood with anisotropic capacitive pressure-sensitive performance

Behaviour of glued-laminated timber beams under impact loading

Study on the most severe condition for structural assessment of nuclear fuel transport package under impact loading

Long-Service-Life Rigid Polyurethane Foam Fillings for Spent Fuel Transportation Casks

Nonlinear analysis model of the progressive damage of aluminum–wood sandwich structures under high-speed impact conditions

Mechanical and Thermal Assessment by BAM of a New Package Design for the Transport of SNF From a German Research Reactor