Abstract:Repeated low velocity impact responses of composite laminates: Variations of (a) peak force, (b) maximum displacement, (c) absorbed energy and (d) damage area versus impact number; (e) Micro‐damage morphology of impacted laminates. And CAI behaviors: (f) Load‐displacement curves; (g) Variation of CAI strength respect to impact number; (h) Strain history of the back surface. In this paper, the repeated low velocity impact responses and compression‐after‐impact (CAI) behaviors of woven glass fiber‐reinforced composite laminates were studied at the same total impact energy. Three types of impact energies, 30, 40, and 60 J, were chosen for the repeated impact tests relative to the single 120 J impact event. The impact behaviors including impact contact force–displacement and energy–time curves during the impact testing were recorded. The variations of the impact mechanical characteristics such as peak impact force, maximum displacement, and energy absorption were evaluated. The methods of visual inspection and stereo microscope were applied to identify the damage morphology of the impacted laminates. The damage accumulation was evaluated employing the absorbed energy fraction and normalized maximum displacement. It was found that the influences of impact energy on the repeated impact mechanical response are more remarkable than that of the impact number, and the impact events with fewer impact numbers cause more damage to the laminates for the same accumulative impact energy. Furthermore, the load–displacement and the CAI strength versus impact number curves were compared for the CAI testing. The ultimate load and the resulted CAI strength decrease with the increase of impact number owing to the influence of damage accumulation in repeated impacts. Highlights Repeated impact responses were studied at the same total impact energy. The impact energy makes significant influence on the impact dynamic responses. The impact events with fewer impact numbers cause more damage to the composites. The CAI behavior was explored considering the effect of damage accumulation. The CAI strength of damaged laminates decreases with impact number increasing.

Weibull Distribution-Based Prediction Model for Compression after Impact (CAI) Strength of CFRP Laminates

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment

Damage and residual compressive strength of multi-layer composite laminates after low velocity impact

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

Impact responses and residual flexural properties of narrow CFRP laminates

Failure Analysis of Carbon Fiber Reinforced Composite Subjected to Low Velocity Impact and Compression after Impact

A Novel Methodology to Research the Residual Compressive Mechanical Properties of Composite Stiffened Panel after Low Velocity Impact Based on Quantification Damage Simulation

Experimental investigation on the low‐velocity impact response and the residual strength of CFRP tubes

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Compression after multiple impact strength of composite laminates prediction method based on machine learning approach

An Experimental and Numerical Study on Impact and Compression after Impact of Stiffened Composite Panels

Numerical investigation of the low-velocity impact damage resistance and tolerance of composite laminates with preloads

Low‐velocity impact damage and compression after impact behavior of CF/PEEK thermoplastic composite laminates

Experimental and numerical investigation on compression after impact behavior of hygrothermal aged CFRP laminates

A Study on the In-Plane Shear-after-Impact Properties of CFRP Composite Laminates

Experimental investigations on the repeated low velocity impact and compression‐after‐impact behaviors of woven glass fiber reinforced composite laminates

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Effects of impact angles and shapes on CAI strength of composite honeycomb structure

Couple effects of multi-impact damage and CAI capability on NCF composites

Numerical Simulation of Low Velocity Impact Failure of CCF300 Carbon Fiber Laminate Based on ABAQUS