Abstract:Results are presented on the fabrication and characterization of high critical temperature Josephson junctions in thin films of YBa2Cu3O7−δ produced by the process of focused electron-beam irradiation using 350 keV electrons. The junctions so produced have uniform spatial current densities, can be described in terms of the resistive shunted junction model, and their current densities can be tailored for a given operating temperature. The physical properties of the damaged barrier can be described as a superconducting material of either reduced or zero critical temperature (Tc), which has a length of ∼15 nm. The Tc reduction is caused primarily by oxygen Frenkel defects in the Cu–O planes. The large beam currents used in the fabrication of the junctions mean that the extent of the barrier is limited by the incident electron-beam diameter, rather than by scattering within the film. The properties of the barrier can be calculated using a superconductor/normal/superconductor (SNS) junction model with no boundary resistance. From the SNS model, we can predict the scaling of the critical current–resistance (IcRn) product and gain insight into the factors controlling the junction properties, Tc, and reproducibility. From the measured IcRn scaling data, we can predict the IcRn product of a junction at a given operating temperature with a given current density. IcRn products of ∼2 mV can be achieved at 4.2 K. The reproducibility of several junctions in a number of samples can be characterized by the ratio of the maximum-to-minimum critical currents on the same substrate of less than 1.4. Stability over several months has been demonstrated at room and refrigerator temperatures (297 and 281 K) for junctions that have been initially over damaged and then annealed at temperatures ∼380 K. Junctions manufactured using conventional lithography (0.5 μm wide) and which are suitable for digital electronics (Ic=500 μA at 40 K) can achieve IcRn products of 650 μV at 40 K. The production of 100 of these stabilized junctions could be accomplished in ∼4 h of irradiation time. The IcRn scaling also indicates that junctions suitable for high sensitivity superconducting quantum interference devices (Ic∼100 μA) can be made with IcRn products of ∼120 μV at 77 K.

Temporal evolution of electric transport properties of Josephson junctions produced by focused-helium-ion-beam irradiation

Temporal evolution of electric transport properties of YBCO Josephson junctions produced by focused Helium ion beam irradiation

Electron-beam damaged high-temperature superconductor Josephson junctions

Electron beam lithography and ion implantation techniques for fabrication of high-Tc Josephson junctions

High-Temperature Superconducting YBa2Cu3O7 – Δ Josephson Junction Fabricated with a Focused Helium Ion Beam

High Tc Josephson nanoJunctions made by ion irradiation : characteristics and reproducibility

MgB2 Josephson Junctions Fabricated by Focused Helium Ion Beam with Different Irradiation Doses on SiC and MgO Substrates

Nano Josephson Superconducting Tunnel Junctions in Y-Ba-Cu-O Direct- Patterned with a Focused Helium Ion Beam

Temporal Evolution of Defects and Related Electric Properties in He-Irradiated YBa2Cu3O7−δ Thin Films

THz Properties of He-FIB YBa 2 Cu 3 O 7-x Josephson Junctions

Temporal Evolution of Defects and Related Electric Properties in He-Irradiated YBa$_{2}$Cu$_{3}$O$_{7-δ}$ Thin Films

Aluminum Josephson junction microstructure and electrical properties modified by thermal annealing

Highly tunable NbTiN Josephson junctions fabricated with focused helium ion beam

Progressive evolution of tunneling characteristics of in-situ fabricated intrinsic Josephson junctions in Bi_2Sr_2CaCu_2O_{8+delta} single crystals

Co-doped BaFe2As2 Josephson Junction Fabricated with a Focused Helium Ion Beam

Co-doped BaFe 2 As 2 Josephson junction fabricated with a focused helium ion beam

Aluminum Josephson junction microstructure and electrical properties modification with thermal annealing

Ion Implantation Effects on Tunneling Properties of Bi2sr2ca1cu2o8+Y Intrinsic Josephson Junctions

High-temperature superconducting edge-type Josephson junctions with modified interface barriers

Josephson Junctions Via Anodization of Epitaxial Al on an InAs Heterostructure

Current transport and the fluctuation of critical current in high-temperature superconductor interface-engineered Josephson junctions