Abstract:In this work, we developed and validated two novel imaging geometries of benchtop multi-pinhole X-ray fluorescence computed tomography (XFCT) systems with Geant4 Toolkit. One of the Monte Carlo (MC) models utilized a fan beam source to illuminate a single slice of the object, a detector and a multi-pinhole collimator to image each slice's X-ray fluorescence (XRF). The other model consisted of a cone-beam X-ray source (designed as a 5 mm wide fan beam to reduce simulation time) to scan the whole object, two detectors and two multi-pinhole collimators to image the emissions. The phantom used in the simulations included four sections, each with three cone-shaped gold nanoparticle (GNP) inserts (5 mm in height, 3 mm in diameter across the top) with center-to-center distances of 4 mm, 4.5 mm and 4.86 mm. The GNPs concentration was 0.1 wt. %, 0.3 wt. %, 0.5 wt. % and 0.7 wt. %, respectively. The diameter of the multi-pinhole collimator was 1 mm. Performance was evaluated for pinhole-detector-distance (PDD) of 5 cm, 3.5 cm and 2.5 cm, and the results for different object layers and for single pinhole and multi-pinhole (9 pinholes) imaging were compared. The data showed that results worsened with decreasing GNPs insert diameters and with decreasing PDD (object-pinhole-distance was fixed). The multi-pinhole configurations performed better than a single pinhole. The detection limit for the first multi-pinhole operation was 0.21 wt. %; the second was 0.24 wt. %. Detection limits for the single pinhole were 0.32 wt. % and 0.35 wt. %, respectively. The first MC model could acquire 2D slice images of the object without rotation and the second MC model could image the 3D object efficiently. These two novel multi-pinhole systems could potentially provide a bioimaging modality for nanomedical applications.

Comparison of different sources for laboratory X-ray microscopy

Laboratory x-ray nano-computed tomography for biomedical research

High-Resolution Scanning X-ray Diffraction Microscopy

Optimization of Image Quality and Acquisition Time for Lab-Based X-ray Microtomography Using an Iterative Reconstruction Algorithm

X-ray microscopy instrumentation developments at NSLS-II: recent progress and future directions

Laboratory X-ray Microscopy of 3D Nanostructures in the Hard X-ray Regime Enabled by a Combination of Multilayer X-ray Optics

Laboratory High-Contrast X-ray Microscopy of Copper Nanostructures Enabled by a Liquid-Metal-Jet X-ray Source

Monte Carlo Simulation for Polychromatic X-ray Fluorescence Computed Tomography with Sheet-Beam Geometry

X-Ray Phase Contrast and Fluorescence Nanotomography for Material Studies

X-ray tomography of extended objects: a comparison of data acquisition approaches

Feasibility Simulation of 3D Benchtop Multi-Pinhole X-ray Fluorescence Computed Tomography with Two Novel Geometries

Micro-CT System for Small Animal Imaging with Ultrafast Laser-Based X-Ray Source

In situ hard X-ray transmission microscopy for material science

Laboratory-based micro-X-ray fluorescence setup using a von Hamos crystal spectrometer and a focused beam X-ray tube

Laboratory-Based Correlative Soft X-ray and Fluorescence Microscopy in an Integrated Setup

Study of a New Portable X-Ray Source with Micro-Beam

Micro-XANES: Chemical Contrast in the Scanning Transmission X-ray Microscope

A Method for Automatic Three-Dimensional Particle Tracing Under Laboratory Conditions Using Dynamic X-Ray Computed Microtomography

Application of Polycapillary X Ray Lens to Eliminate Both the Effect of X Ray Source Size and Scatter of the Sample in Laboratory Tomography

Experimental Demonstration of X-Ray Fluorescence CT Using a Spatially Distributed Multi-Beam X-Ray Source