Abstract:Capacitive and optical-based pressure sensors are considered for wide application in industries and R&D labs due to their superior performance. In general, these sensors use a diaphragm as a sensing element that needs to be designed accurately to achieve the desired level of accuracy for a higher operating range of the sensor. To design such a diaphragm, the conventional strain-based model cannot be used efficiently as the strain gradient starts dominating to introduce non-linear deformation with respect to the applied load when the diaphragm thickness reduces or the operating range increases beyond a certain value. Thus, there is a need to establish a comprehensive understanding and accurate modeling method to establish the underlying mechanism of the strain gradient. In view of this, a finite element analysis is carried out with moving-mesh to investigate the effect of the strain gradient phenomenon extensively in this paper. For the investigation, a few parameters are studied such as strain, strain gradient, bending rigidity, and deflection. It shows that the strain gradient spreads radially on the diaphragm and its zone of influence depends on the thickness as well as the applied pressure. This increases the bending rigidity significantly and the diaphragm deflection becomes non-linear as compared to the classical theory of bending. For validation of the present model, the bending rigidity and the deflection behavior are also compared with an earlier developed mathematical model as well as experimental results, and the same is discussed in this paper. The present work is useful for an accurate design and optimization of a diaphragm or a flexure for small size or/and higher operating range of pressure sensors and actuators.

Pneumatic Pressure Cell with Twin Diaphragms Embedding Spherical Corrugations in a Dual Diaphragm Structure

Vibrating Cantilever Transducer Incorporated in Dual Diaphragms Structure for Sensing Differential Pneumatic Pressure

A Soft Piezoresistive Pressure Sensor Based on Porous Conductive CB/PDMS Composite

Radial Displacement Measurement of Hydrogen Storage Cylinders under Internal Pressure Based on Fringe Projection Profilometry

A Hybrid Pressure Cell of Pyrophyllite and Magnesium Oxide to Extend the Pressure Range for Large Volume Cubic Presses

Design of Corrugated Diaphragm-Based MEMS Pressure Sensor for Biomedical Applications

Structured Diaphragm with a Centre Boss and Four Peninsulas for High Sensitivity and High Linearity Pressure Sensors

A New Silicon Diaphragm Pressure Sensor and Its Stress Analysis

Influence of Corrugation Size and Location on Sensitivity Enhancement for MEMS-Based Pressure Sensor

Prefabrication design, theoretical framework and simulation demonstration of a meander-shaped MEMS piezoresistive pressure sensor implanted on silicon substrate circular diaphragm for enhancement of key performance parameters utilized for low-pressure applications

Design and Simulation of Corrugated Diaphragm Applied to the MEMS Fiber Optic Pressure Sensor

Adaptation of the Bridgman anvil cell to liquid pressure mediums

Ultrasensitive Pressure Sensor Based on an Integrated Circular Piezoelectric MEMS Resonator and Diaphragm Structure

Modeling and analysis of the effect of strain gradient to design diaphragm for pressure sensing application through finite element analysis

Optical Fiber Pressure Sensor Based on Corrugated Diaphragm Structure

Pneumatic Bellow Actuator with Embedded Sensor Using Conductive Carbon Grease

Design and analysis of a MEMS pressure sensor with a bossed membrane and ancillary bi-functional frog arm structure for low pressure measurement

High Sensitive and Linear Pressure Sensor for Ultra-low Pressure Measurement

An Electrostatic Comb Excitation Resonant Pressure Sensor for High Pressure Applications

A resonant high-pressure microsensor based on a composite pressure-sensitive mechanism of diaphragm bending and volume compression

A Differential Hall Effect Based Pressure Sensor