Abstract:Current progress in numerical simulations and machine learning allows one to apply complex loading conditions for the identification of parameters in plasticity models. This possibility expands the spectrum of examined deformed states and makes the identified model more consistent with engineering practice. A combined experimental-numerical approach to identify the model parameters and study the dynamic plasticity of metals is developed and applied to the case of cold-rolled OFHC copper. In the experimental part, profiled projectiles (reduced cylinders or cones in the head part) are proposed for the Taylor impact problem for the first time for material characterization. These projectiles allow us to reach large plastic deformations with true strains up to 1.3 at strain rates up to 105 s-1 at impact velocities below 130 m/s. The experimental results are used for the optimization of parameters of the dislocation plasticity model implemented in 3D with the numerical scheme of smoothed particle hydrodynamics (SPH). A Bayesian statistical method in combination with a trained artificial neural network as an SPH emulator is applied to optimize the parameters of the dislocation plasticity model. It is shown that classical Taylor cylinders are not enough for a univocal selection of the model parameters, while the profiled cylinders provide better optimization even if used separately. The combination of different shapes and an increase in the number of experiments increase the quality of optimization. The optimized numerical model is successfully validated by the experimental data about the shock wave profiles in flyer plate experiments from the literature. In total, a cheap, simple, but efficient route for optimizing a dynamic plasticity model is proposed. The dislocation plasticity model is extended to estimate grain refinement and volume fractions of weakened areas in comparison with experimental observations.

Validation of the material point method and plasticity with Taylor impact tests

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

An evaluation of plastic flow stress models for the simulation of high-temperature and high-strain-rate deformation of metals

Identification of material parameters at high strain rates using ballistic impact tests and inverse finite element analysis

Instrumented Taylor impact test for measuring stress-strain curve through single trial

Material point method simulations of fragmenting cylinders

Simulation of impact and fragmentation with the material point method

0610 A Comparative Study on Gao-Zhang and Johnson-Cook Constitutive Models

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Taylor-based Nonlocal Theory of Plasticity: Numerical Studies of the Micro-Indentation Experiments and Crack Tip Fields

Simulation of Spall Fracture Based on Material Point Method

Material Point Method for Impact and Explosion Problems

Modified Taylor Impact Tests with Profiled Copper Cylinders: Experiment and Optimization of Dislocation Plasticity Model

Semi-Crystalline Polymers Applied to Taylor Impact Test: Constitutive, Experimental and FEM Analysis

Study of plastically deformed region underneath the ball in indentation tests and evaluation of mechanical properties of materials through finite element simulation and a hybrid algorithm

The finite deformation theory of Taylor-based nonlocal plasticity

The Material Point Method A Continuum-Based Particle Method For Extreme Loading Cases Preface

Crystal plasticity assessment of the effect of material parameters on contact depth during spherical indentation

Machine Learning- and Finite Element-Based Temperature- and Rate-Dependent Plasticity Model: Application to the Tensile Behavior

Improvement of the return mapping algorithm based on the implicit function theorem with application to ductile fracture analysis using the GTN model

Numerical simulation of fracture in Taylor rod impact problem with stochastically distributed inherent damage