Abstract:Thanks to wavelength flexibility, interferometric filters such as Fabry-Perot interferometers (FPIs) and field-widened Michelson interferometers (FWMIs) have shown great convenience for spectrally separating the molecule and aerosol scattering components in the high-spectral-resolution lidar (HSRL) return signal. In this paper, performance comparisons between the FPI and FWMI as a spectroscopic discrimination filter in HSRL are performed. We first present a theoretical method for spectral transmission analysis and quantitative evaluation on the spectral discrimination. Then the process in determining the parameters of the FPI and FWMI for the performance comparisons is described. The influences from the incident field of view (FOV), the cumulative wavefront error induced by practical imperfections, and the frequency locking error on the spectral discrimination performance of the two filters are discussed in detail. Quantitative analyses demonstrate that FPI can produce higher transmittance while the remarkable spectral discrimination is one of the most appealing advantages of FWMI. As a result of the field-widened design, the FWMI still performs well even under the illumination with large FOV while the FPI is only qualified for a small incident angle. The cumulative wavefront error attaches a great effect on the spectral discrimination performance of the interferometric filters. We suggest if a cumulative wavefront error is less than 0.05 waves RMS, it is beneficial to employ the FWMI; otherwise, FPI may be more proper. Although the FWMI shows much more sensitivity to the frequency locking error, it can outperform the FPI given a locking error less than 0.1 GHz is achieved. In summary, the FWMI is very competent in HSRL applications if these practical engineering and control problems can be solved, theoretically. Some other estimations neglected in this paper can also be carried out through the analytical method illustrated herein.

Distance and Velocity Characterizations Through Sampling Rate-Limited Main Interferometer in a Silicon Platform

A 16-Channel Analog CMOS SiPM with On-Chip Front-End for D-ToF LiDAR

Field-widened Michelson Interferometer for Spectral Discrimination in High-Spectral-resolution Lidar: Theoretical Framework.

Field-widened Michelson Interferometer System As the Spectroscopic Filter of High-Spectral-resolution Lidar

Comparisons Between Field-Widen Michelson Interferometer and Fabry-Perot Interferometer As the Spectroscopic Filter in High Spectral Resolution Lidar

Synchronous measurement of velocity and distance with high resolution based on comb reference common-path interferometric FMCW lidar

Recent Developments of Interferometric Wavefront Sensing

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

Silicon photonic integrated FMCW coherent LIDAR receiving chip

All-fiber heterodyne velocity and displacement interferometer based on DPLL Doppler tracking with sub-nanometer per second and picometer sensitivity

Ultrafast and precise distance measurement via real-time chirped pulse interferometry

Silicon FMCW LiDAR chip integrated with SLG beam scanner and k-clock interferometer for operation with wavelength-swept laser source

Measurement of Tiny Displacement with Fast Sampling by A Heterodyne Interferometer and Error Analysis

Video-rate high-precision time-frequency multiplexed 3D coherent ranging

Laser Feedback Frequency-Modulated Continuous-Wave LiDAR and 3-D Imaging.

Distance recovery via swept frequency mixing for data-efficient FMCW LiDAR

Electro-optic Frequency Comb-Enabled Precise Distance Measurement with Megahertz Acquisition Rate

Precise and Fast LIDAR via Electrical Asynchronous Sampling Based on a Single Femtosecond Laser

FMCW LiDAR with a coherent receiver chip based on 3 μm SOI photonics platform

Sinusoidal phase-modulating self-mixing interferometer with nanometer resolution and improved measurement velocity range

Quantum LiDAR with Frequency Modulated Continuous Wave