Abstract:Effects of various counterface roughness components (i.e., magnitude, density, direction) on polymer wear and transfer film are strongly coupled and difficult to isolate and test. Previous works found counterface roughness grooves and ridges perpendicular to the direction of sliding were generally beneficial to debris retention and tribofilm formation, but the effect was competing with a decrease in debris retention caused by in-situ generated furrows parallel to the direction of sliding. To further study the effect of roughness directionality on polymer wear, a model polymer solid lubricant (5 wt% Al2O3-PTFE) was slid against counterfaces with laser-textured grooves parallel to the direction of reciprocated sliding and a 2 × 3 variable matrix of groove depth and density. The results found: (1) all textures yielded higher polymer wear than the untextured surface did, (2) counterface with the deepest, densest grooves had the highest polymer wear rate and transient wear volume (wear volume during run-in sliding), (3) shallow groove textures generally produced less wear of the counterface and polymer, stronger tribofilm IR signature and more continuous and complete tribofilms than deep groove textures did. A new roughness parameter (IRa) was defined as a single, unified and comprehensive metric for counterface roughness directionality. By comparing with a previous study, the results found a general correlation between IRa and polymer transient wear volume and suggested strong beneficial effects of perpendicular grooves on debris retention and parallel grooves on debris ejection. A simple framework was postulated to illustrate the interrelations between texture parameters, roughness directionality and debris mobility. It was further supported by analyzing results of a closely relevant work. Although being strongly limited to the model polymer solid lubricant, this study provides perhaps some useful tools for advancing our understanding of the complex relations between roughness directionality, debris mobility (e.g., ejection, retention) and wear of polymer solid lubricant.

The effect of surface roughness and contaminant on the dynamic friction of porcelain tile

The need for better metrics for floor-tile topography: Conventional metrics correlate only modestly with shoe-floor friction

Friction Between Footwear And Floor Covered With Solid Particles Under Dry And Wet Conditions

The effect of surface roughness on friction properties of silica-filled epoxidised natural rubber

Tribological Analysis of Surface Textures in Porcelain Tiles for Enhancing Pedestrian Walkway Safety

The influence of footwear tread groove parameters on available friction

Effect Of Surface Roughness And Wear In Lubricated Of Self-Mated Alumina On Friction Reciprocating Sliding Contact

Study on the Tribological Properties between Rubber and Floor Tile

The unrecognized importance of roughness directionality to polymer wear

Effect of surface roughness on sliding friction in lubricated contacts-reciprocal experiment study

Synergistic Effect of Microconvex Texture and Particle Medium on the Tribological Property of the Rubber Sliding Interface

The effect of surface roughness on normal restitution coefficient, adhesion force and friction coefficient of the particle-wall collision

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Surface Roughness Effect on the Friction and Wear Behaviour of Acrylonitrile–Butadiene Rubber (NBR) Under Oil Lubrication

Effect of Surface Grooves on the Static Friction of an Elastic Slider

Effect of Young’s Modulus and Surface Roughness on the Inter-Particle Friction of Granular Materials

Rubber adhesion and friction: role of surface energy and contamination films

Dry and lubricated sliding friction for rubber on concrete: the role of surface energies

Experimental and numerical study of the effect of surface patterning on the frictional properties of polymer surfaces

Dependence of Adhesive Friction on Surface Roughness and Elastic Modulus

A Novel Surface Texture Shape for Directional Friction Control