The effect of surface roughness on normal restitution coefficient, adhesion force and friction coefficient of the particle-wall collision

Xue Li,Ming Dong,Dongyue Jiang,Sufen Li,Yan Shang

DOI: https://doi.org/10.1016/j.powtec.2019.11.120

IF: 5.64

2020-02-01

Powder Technology

Abstract:The normal restitution coefficient is an important parameter in particle deposition which is widely used in industrial fields. The normal restitution coefficient can be affected by many factors, and a typical factor is the surface roughness. Furthermore, a rough surface will influence the adhesion force and friction coefficient. The adhesion force and friction coefficient have effects on the normal restitution coefficient. However, the relationship between the normal restitution coefficient and the surface roughness has not been obtained. Therefore, an experimental study of microspheres impact on a rough surface is developed. The normal restitution coefficient decreases with the increasing surface roughness. The adhesion force is calculated by the Rabinovich model, and the results indicated that the adhesion force increases with the increasing surface roughness within the surface roughness range in this paper. Moreover, the adhesion energy and friction coefficient dissipation increase with the increasing surface roughness.

engineering, chemical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to explore the influence of surface roughness on the normal restitution coefficient, adhesion force and friction coefficient during the collision process between particles and the wall. Specifically, the author experimentally studied how these parameters change with the change of surface roughness when micro - spheres impact rough surfaces. The paper points out that surface roughness not only affects the contact force, but also generates friction during the collision process, thereby affecting the normal restitution coefficient. In addition, the paper also calculates the adhesion force and friction coefficient by numerical methods to further analyze the variation rules of these factors under different surface roughness conditions.

### Main research contents:
1. **Normal restitution coefficient**: The influence of surface roughness on the normal restitution coefficient during the collision process between particles and the wall was studied. The experimental results show that the normal restitution coefficient decreases as the surface roughness increases.
2. **Adhesion force**: The adhesion force under different surface roughness conditions was calculated using the Rabinovich model, and the change of the adhesion force with the surface roughness and separation distance was analyzed.
3. **Friction coefficient**: The maximum static friction coefficient was calculated, and the influence of surface roughness on the friction coefficient was discussed.

### Key findings:
- **Normal restitution coefficient**: As the surface roughness increases, the normal restitution coefficient gradually decreases. This is because the surface roughness not only affects the contact force, but also generates friction during the collision process.
- **Adhesion force**: The adhesion force increases as the surface roughness increases, but at a larger separation distance, the adhesion force will gradually decrease. This is mainly because the adhesion force is a short - range force and plays a major role in the near - wall region.
- **Friction coefficient**: Surface roughness has a significant influence on the friction coefficient, and the friction coefficient changes as the surface roughness increases.

### Formula summary:
- **Normal restitution coefficient**:
\[
e_n=\frac{v_{\text{rebound}}}{v_{\text{incident}}}
\]
- **Adhesion force (Rabinovich model)**:
\[
F_{\text{ad}}^{\text{Rab}}=\frac{6A_H}{\pi}\left(\frac{1}{R}+\frac{1}{r}+\frac{1}{R + r}\right)\left(\frac{1}{H_0+1.48\delta_{\text{rms}}}\right)
\]
- **Maximum static friction coefficient**:
\[
\mu=\mu_a+\beta(\mu_d-\mu_a)
\]
where \(\mu_a\) is the friction interaction parameter of the rough peak, \(\mu_d\) is the friction interaction parameter of the worn part, and \(\beta\) is a parameter related to the elastic deformation stage.

### Conclusion:
This paper systematically studied the influence of surface roughness on the normal restitution coefficient, adhesion force and friction coefficient during the collision process between particles and the wall through experiments and numerical simulations. The research results are of great significance for understanding the mechanical behavior in the particle deposition process, especially in industrial applications such as pharmaceuticals, electrostatic dust removal and other fields.