Abstract:Pyroplastic deformation is still an important defect caused during firing in the manufacture of porcelain tiles when there is no control over the raw materials used in the formulation of ceramic tiles. The present study used mixing design as a tool in the development of pastes formulations for Brazilian porcelain tile manufacturing in order to reduce their pyroplastic deformation. Ceramic industry in Brazil has typical and complex way to set up porcelain tile formulations, using regularly more than a dozen raw materials. Therefore, the originality in this work was understanding the formulation by means of a pseudocomponent‐based approach (multiminerals triaxial diagram) and defining parameters that minimize that problem. Eleven different raw materials, supplied by Brazilian ceramic manufacturer, were used and characterized according to their physical–chemical properties. Later, raw materials were divided into three chemical categories and through a simplex‐centroid mixture design, defining the maximum limit of feldspar in 70%, 10 formulations in the experimental region were defined. All formulations were analyzed for particle size distribution, bulk density (postpressing and postburning), mechanical strength (postpressing and postfiring), thermal shrinkage, water absorption, and pyroplastic deformation. Thus, formulations that presented the most admissible behavior in the manufacture of porcelain tiles were selected, and tests were carried out for chemical, mineralogical, thermal (differential scanning calorimeter [DSC]/thermogravimetric [TG]), thermal expansion, porosity analysis, and optical fleximeter (pyroplasticity). All results were analyzed using response surfaces with data obtained by analysis of variance (ANOVA). Mixture design method proved to be a valuable tool to observe the behavior of raw materials and to optimization of Brazilian porcelain tile formulations.

Tribological Analysis of Surface Textures in Porcelain Tiles for Enhancing Pedestrian Walkway Safety

The effect of surface roughness and contaminant on the dynamic friction of porcelain tile

A Novel Method for Evaluating the Effectiveness of Shoe-Tread Designs Relevant to Slip and Fall Accidents

Evaluation of surface textures and skid resistance of pervious concrete pavement

The Experimental Study of Slip - Resistance of Existing Floors on a College Campus

The effect of tread patterns on slip resistance of footwear outsoles based on composite materials in icy conditions

Recent Progress on Anti-Slip and Highly Wear-Resistant Elastic Coatings: An Overview

Mechanical Characterization of Gres Porcelain and Low-Velocity Impact Numerical Modeling

Synergistic Effect of Microconvex Texture and Particle Medium on the Tribological Property of the Rubber Sliding Interface

Enhancing thermal properties and surface quality of lappato glazed porcelain tiles through milling time optimization

Correlation analysis of composition, microstructure, and final properties of porcelain tiles: an experimental study

Efficacy of a rubber outsole with a hybrid surface pattern for preventing slips on icy surfaces

Investigation on the Tribological Behavior and Wear Mechanism of Five Different Veneering Porcelains

Study on the Tribological Properties between Rubber and Floor Tile

Determination of The Static Friction Coefficient of Some Materials Used for Anti-slip Safety with ANOVA

Perceived floor slipperiness and floor roughness in a gait experiment.

Pyroplastic deformation analysis of Brazilian porcelain tile formulations using mixture design

A Novel Surface Texture Shape for Directional Friction Control

The effect of wear on slip-resistance of winter footwear with composite outsoles: A pilot study

Effect of V-Groove Surface Pattern on the Tribological Properties of Epoxy