Abstract:Thermally stable CeO2 cubes and nanospheres were synthesized and modified by sulfation treatment. Non-sulfated CeO2 cubes and nanospheres did not exhibit good catalytic performance for selective catalytic reduction of NOx with NH3 (NH3-SCR), but mainly contributed towards an undesired side reaction of NH3 oxidation above 350 degrees C. Based on the structural, morphological and physicochemical characterization, it was observed that CeO2 nanospheres comprising small crystallites could easily release active oxygen species, which resulted in strong NH3 oxidation. However, sulfation treatment greatly improved the catalytic performance of NH3-SCR on both CeO2 cubes and nanospheres. Sulfated CeO2 catalysts did not contribute to significant NH3 oxidation due to the inhibited reducibility of Ce4+ coordinated with the surface sulfates. The adsorbed ammonia could be activated on Bronsted acid sites generated by the formation of surface Ce-2(SO4)(3) species, while gaseous NOx could be activated on separate surface sites of Ce4+. The presence of separate reaction sites for NH3 and NOx is believed to be important for the improved catalytic performance of SCR reaction. Sulfated CeO2 cubes outperformed sulfated CeO2 nanospheres in the entire test temperature window (200-500 degrees C). The improved performance of sulfated CeO2 cubes appears to be related to surfaces with abundant Bronsted acid sites and relatively weak reducibility of Ce4+. These fundamental findings contribute to a better mechanistic understanding needed for designing efficient CeO2-based NOx reduction catalysts in the future.

Effect of SBA-15 Morphology in the Catalytic Performance of Pt/Ce-SBA-15 Catalyst for NOx Reduction

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Modification Effect of Pt on the Active Sites of Sulfated CeO 2 Nanorods for the Selective Catalytic Reduction of NO

Shape Dependence and Sulfate Promotion of CeO2 for Selective Catalytic Reduction of NO with NH3

Insights into Ni and (Ce)SBA-15-CTA interaction and syngas formation rate

Direct Synthesis, Characterization and Catalytic Performance of Bimetallic Fe–Mo-SBA-15 Materials in Selective Catalytic Reduction of NO with NH3

Effects of Anaerobic SO2 Treatment on Nano-Ceo2 of Different Morphologies for Selective Catalytic Reduction of NOx with NH3

Catalytic performance and mechanistic evaluation of sulfated CeO2 cubes for selective catalytic reduction of NOx with ammonia

The Enhanced Performance of Ceria with Surface Sulfation for Selective Catalytic Reduction of No by Nh3

The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts

Promotional Effects of Cerium Modification of Cu-USY Catalysts on the Low Temperature Activity of NH3-SCR

Direct Synthesis, Characterization and Catalytic Performance of Al–Fe-SBA-15 Materials in Selective Catalytic Reduction of NO with NH3

Effect of Preferential Exposure of Anatase TiO2 {0 0 1} Facets on the Performance of Mn-Ce/TiO2 Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3

The Tuned Selective Catalytic Reduction Behaviors of No over the Pt/Ceo2 Catalysts by Preferentially Exposing Different Facets of Ceo2 Supports

Influence of CeO2 morphology on WO3/CeO2 catalyzed NO selective catalytic reduction by NH3

How Do the Morphology and Crystal Facet of CeO2 Determine the Catalytic Activity Toward NO Removal?

Influence of Sulfation on CeO2-ZrO2 Catalysts for NO Reduction with NH3

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

Morphology and Crystal-Plane Effects of CeO2 on TiO2/CeO2 Catalysts During NH3-SCR Reaction

The Superior Performance of Sol–Gel Made Ce–O–P Catalyst for Selective Catalytic Reduction of NO with NH3