Abstract:As we know, 3DPC is printed layer by layer compared with mold-casting conventional concrete. Pore structure and layer-to-layer interface are two main aspects of the internal structure for 3DPC, which decide 3DPC's mechanical performance. The layer-to-layer interface caused by printing is specific to 3DPC. The emphasis of this study lies in the layer-to-layer interfaces of 3DPC. The first aim of this study is to quantify the characteristics of the layer-to-layer interface and therefore characterize different aspects of the interfaces. The second aim of this study is to explore how the internal structure of printed concrete influences the mechanical performance of 3DPC. This research set out to design a series of experimental comparisons between 3DPC and casted concrete with the same compositions. Mechanical tests, i.e., compressive stress, ultrasonic Pulse Velocity test, flexural tension, and tension splitting, as well as the Ultrasonic Pulse Velocity test, were performed to check the mechanical performance of 3DPC. Contrary to what has often been expected, the mechanical test results showed the printed concrete has a quality not worse than casted concrete with the same recipe. Meanwhile, the X-ray computed tomography (X-CT) is used to characterize the internal structure, pore shapes, and interfaces of 3DPC. First, the investigation revealed that the lower total porosity and fewer big voids could be the fundamental causes meaning 3DPC has a better mechanical performance than casted concrete. Second, the statistics based on aspect ratio show that the distribution curves follow similar trends, regardless of the printed or casted concrete. Third, this study quantified the depth of the different interfaces for 3DPC. The results suggest that the porosity in an interface varies in a range. The author's pioneer work has contributed to our present understanding of the interfaces of 3DPC.

The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

3D Printed Concrete: Fresh and Hardened Properties

Investigation of the material mixtures and fiber addition for 3D concrete printing

Effect of Silica Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete

Modification effect of nanosilica and polypropylene fiber for extrusion-based 3D printing concrete: Printability and mechanical anisotropy

An overview of recent advancements in fibre-reinforced 3D printing concrete

Development of concrete mixes for 3D printing using simple tools and techniques

Assessment of materials, design parameters and some properties of 3D printing concrete mixtures; a state-of-the-art review

Investigation of fresh and hardened properties of 3D printable concrete containing ozone-modified carbon fiber

Influence of print speed and nozzle diameter on the fiber alignment in 3D printed ultra-high-performance concrete

Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate Gradation Optimization

Mix design, optimization and performance evaluation of extrusion-based 3D printable concrete

A review of 3D printed concrete: Performance requirements, testing measurements and mix design

Preliminary Study of the Fresh and Hard Properties of UHPC That Is Used to Produce 3D Printed Mortar

Effect of supplementary cementitious materials on properties of 3D printed conventional and alkali-activated concrete: A review

Rheological characterization of ultra-high performance concrete for 3D printing

Three-Dimensional Printable Concrete by an Ultra-Thin Nozzle and Fully Sealed Extrusion

Utilization of antimony tailings in fiber-reinforced 3D printed concrete: A sustainable approach for construction materials

3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials: From Mixture Design to Printability Evaluation

Development of CO2-integrated 3D printing concrete