Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Electroadsorptive graphite electrode material for desalination of brackish water using capacitive deionisation (CDI) technique, DC-DC system

3D-Printed river-type thick carbon electrodes for docking possible practical application-level capacitive deionization

Recovery of Dilute Caustic Solution from the Desalination Plant Reverse Osmosis Discharge Brine Wastewater

Solar reduced graphene oxide decorated with manganese dioxide nanostructures for brackish water desalination using asymmetric capacitive deionization

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

3D interconnected porous graphene architecture as a high-performance capacitive deionization electrode

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Selection of graphene as a conductive additive for biomass-based activated carbon electrode in capacitive deionization: acid-treated as a practical approach to reduce graphene content

Electrosorption for Organic Pollutants Removal and Desalination by Graphite and Activated Carbon Fiber Composite Electrodes

Sulfonated GO coated carbon electrodes with cation-selective functions for enhanced capacitive deionization of saltwater

Carbon electrode with cross-linked and charged chitosan binder for enhanced capacitive deionization performance

Effect of ion exchange resin membranes and activated carbon electrodes in water desalination using capacitive deionization technique with saline streams

Studies Of Activated Carbon Electrodes For Capacitive Seawater Desalination

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Electrochemical capacitive desalination behavior of activated carbon fibers

3D Graphene-supported N-doped Hierarchically Porous Carbon for Capacitive Deionization of Saline Water

Highly porous activated carbon with multi-channeled structure derived from loofa sponge as a capacitive electrode material for the deionization of brackish water

Mesopore-enhanced graphene electrodes with modified hydrophilicity for ultrahigh capacitive deionization

The regulation of biochar surface potential to achieve rapid capacitive deionization

Low-Energy Desalination Techniques, Development of Capacitive Deionization Systems, and Utilization of Activated Carbon