Abstract:Fiber concrete exhibits superior performance in various aspects compared to plain concrete and has been widely researched and applied worldwide. However, many industrially made fibers are expensive, and their cost has to be considered before use; thus, it would be economically valuable to find inexpensive fibers with excellent properties to make fiber concrete. Rural areas have many rich straw resources to be disposed of; at the same time, the rapid development of the automobile industry has introduced a large number of used tires containing steel wire with a very low reuse rate. These two low-cost materials can be processed to make fibers, making the study of mechanical properties regarding their incorporation into concrete practically significant for reducing the cost of fiber concrete. Based on this, a three-factor, three-level orthogonal test was conducted to investigate the effects of different dosages of corn straw fibers and scrap steel fibers, as well as the water-cement ratio, on the mechanical properties of concrete. The optimum level of each factor for blended straw-waste-steel-fiber concrete with different mechanical properties was obtained using the polar and ANOVA methods. It was found that the compressive strength, splitting tensile strength, flexural strength, and impact resistance of the specimens after fiber dosing were better than those of plain concrete specimens with the same water-cement ratio. The maximum improvement was 14.96% in cubic compressive strength, 42.90% in tensile strength, and 16.30% in flexural strength, while the maximum improvement in impact energy consumption at the final crack was 228.03%. Combined with SEM microanalysis, the two fibers formed a stronger whole with the C-S-H gel. When the specimen was subjected to load, the two fibers were able to withstand part of the load, thus enhancing the load-bearing capacity. Finally, the optimal mix ratio of blended straw-scrap-steel-fiber concrete was determined to be 0.8% corn straw fibers by volume, 0.6% scrap steel fibers by volume, and a 0.45 water-cement ratio by combining the weights of the levels of each factor under its four different mechanical properties through hierarchical analysis. This analysis of mechanical properties provides a reference for practical applications in future projects.

Research and Development of New Polylactic Acid (PLA) Fiber Concrete Materials and Performance Research

Test Research on the Influencing Factors of the Mechanical Property of the Polypropylene Fiber Recycled Concrete

The Research of Layer Steel Fiber Reinforced Concrete on Mecha-Nical Properties and Fracture Performance

Experimental Study on Mechanical and Durability Properties of Glass and Polypropylene Fiber Reinforced Concrete

Mechanical Properties and Durability of Polypropylene and Steel Fiber-Reinforced Recycled Aggregates Concrete (FRRAC): A Review

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

Nanoscale mechanical properties and microstructure characterization of ultra-high performance fiber reinforced concrete materials

Composite Fiber Wrapping Techniques for Enhanced Concrete Mechanics

Mechanical Properties of Polymer Modified Concrete with Steel Fiber

Mechanical Properties and Microanalytical Study of Concrete Reinforced with Blended Corn Straw and Scrap Steel Fibers

Experimental Study on Mechanical Performance and Microstructure of Polypropylene Fiber Recycled Concrete

Experimental Research on Mechanical Performance of Hybrid Fiber Reinforced Cementitious Composites with Polyvinyl Alcohol Short Fiber and Carbon Textile

Research on Mechanical Properties and Strengthening Mechanism of Polypropylene Synthetic Macro-Fiber Reinforced Concrete

Investigation of Mechanical Properties of Ultra-High-Performance Polyethylene-Fiber-Reinforced Recycled-Brick-Aggregate Concrete

Research Status and Outlook on High Temperature Performance of Fiber Concrete

Study of Mechanical Properties of an Eco-Friendly Concrete Containing Recycled Carbon Fiber Reinforced Polymer and Recycled Aggregate

Preparation and Characterization for the Thermal Stability and Mechanical Property of PLA and PLA/CF Samples Built by FFF Approach

Flexural fatigue performance and damage evolution analysis of multiscale polypropylene fiber‐reinforced concrete

An Investigation of Mechanical Properties of Recycled Carbon Fiber Reinforced Ultra-High-Performance Concrete

Mechanical Properties of Fully Recycled Aggregate Concrete Reinforced with Steel Fiber and Polypropylene Fiber

A review of research and application of polylactic acid composites