Abstract:This study proposes a three-dimensional failure criterion based on the Griffith criterion, which accounts for the nonlinear influences of hydrostatic pressure and Lode angle on the failure strength of concrete. Two approaches are utilized in the proposed criterion to describe the Lode-dependence, one is to use the biaxial compressive envelopes to derive each meridian directly, and the other is to employ a scaling function between the compressive and tensile meridians. Besides, the proposed criterion can be expressed by the principal stresses in the form of f ( σ 1 , σ 2 , σ 3 ) = 0 as well as by the stress invariants in the form of J 2 = f ( P , θ ). To comprehensively validate the proposed criterion, it collects 37 groups of tests with nearly 1000 test data conducted on concrete under biaxial and triaxial stress states. It demonstrates that predictions of the proposed criterion, including biaxial failure envelope, compressive meridian, tensile meridian, deviatoric section, and multiaxial strength, are close to the corresponding experimental observations. The proposed criterion requires four parameters, three of which have clear physical meaning, namely the tensile, compressive, and equal-biaxial compressive strength ( f t , f c , and f bc ), and the rest parameter n can be determined by the triaxial compressive strength. Aimed at elaborating the physical meaning of n , it interprets the proposed criterion as a combination of the original Griffith, Mohr-Coulomb, and Rankine criteria. In addition, a simple modification based on the proposed criterion is also suggested to describe the transformation from shear failure to ductile failure of concrete with the increase of pressure. Compared with the existing Ottosen and Willam-Warnke criteria, the proposed criterion is simple in determining parameters, convenient in the application, and diverse in describing the Lode-dependence.

Concrete strength criteria for biaxial and triaxial state of stress

Failure criterion for concrete under volumetric stress state conditions

Comparison of Strength Criteria Based on the Measurements on Concrete

STUDY OF BEARING CAPACITY AND COMPLETE STRESS-STAIN CURVES FOR CONCRETE FILLED SQUARE STEEL TUBE COLUMNS

Effective restrained radius of confined concrete

FINITE ELEMENT ANALYSIS OF CONCRETE SPECIMEN

Static-Dynamic Combined Multiaxial Strength Criterion For Concrete

Influence of Axial Stress on Shear Response of Reinforced Concrete Elements

A novel three-dimensional modified Griffith failure criterion for concrete

High-Strength Concrete Subjected to Triaxial Compression

Equivalent Confining Stress-Based Strength Model for Concrete under Triaxial Compression

Experimental Study on Dynamic Biaxial Tension-Compression Properties of Hydraulic Concrete

Experimental Study on Mechanical Properties and Failure Criteria of Self-Compacting Concrete under Biaxial Tension-Compression

Confinement-dependent failure criterion for high-strength concrete in multiaxial stress states

Influence of Stress State on Dynamic Behaviors of Concrete under True Triaxial Confinements

Dynamic strength criterion of concrete utilizing dynamic coordinates

Numerical studies of strength of concrete cylinders for compression

An Improved Failure Criterion for the Concrete Based on Unified Twin Shear Strength Theory

Mechanical Behaviour of Air-Entrained Concrete

Experimental Investigation on Criterion of Three-Dimensional Mixed-Mode Fracture for Concrete

Biaxial Behaviour Of Plain Concrete Subjected To Dynamic Compression With Constant Lateral Stress