Abstract:Concrete has a great capacity to withstand compressive strength, but it is rather weak at resisting tensile stresses, which ultimately result in the formation of cracks in concrete buildings. The development of cracks has a significant impact on the durability of concrete because they serve as direct pathways for corrosive substances that harm the concrete’s constituents. Consequently, the reinforced concrete may experience degradation, cracking, weakening, or progressive disintegration. To mitigate such problems, it is advisable to include discrete fibres uniformly throughout the concrete mixture. The fibers function by spanning the voids created by fractures, therefore decelerating the mechanism of fracture initiation and advancement. It is not practical to assess the beginning and spread of cracks when there are uncertainties in the components and geometrical factors through probabilistic methods. This research examines the behaviour of variation of steel fibers in Fiber Reinforced Concrete (FRC) via Finite Element Method (FEM) modeling. In this study also the fracture parameters such as fracture energy, and fracture toughness have been computed through FEM analysis. The FEM constitutive model developed was also validated with the experimental result. The compressive strength of the developed constitutive model was 28.50 MPa which is very close to the 28-day compressive strength obtained through the experiment, i.e., 28.79 MPa. Load carrying capacity obtained through FEM was 7.9 kN, 18 kN, and 24 kN for three FEM models developed for three varying percentages of steel fiber 0.25%, 0.5%, and 0.75% respectively. The study developed a FEM model which can be used for calculating the fracture parameters of Steel Fibre-Reinforced Concrete (SFRC).

FINITE ELEMENT ANALYSIS OF CONCRETE SPECIMEN

EXTEND FINITE ELEMENT NUMERICAL SIMULATION FOR CRACK PROPAGATION OF FIBER CONCRETE

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Numerical simulation of cracking of early-age concrete three-point beams

Numerical Simulation of Dynamic Mechanical Properties of Concrete under Uniaxial Compression

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Numerical simulation of ultra-high-performance concrete's compressive and tensile behaviour in beams

Behavior Analysis and Design of Concrete-Filled Steel Circular-Tube Short Columns Subjected to Axial Compression

Fracture analysis of steel fibre-reinforced concrete using Finite element method modeling

Nonlinear Finite-Element Analysis of Concrete Structures

Numerical analysis of reinforced concrete beams subjected to impact loads

FINITE ELEMENT ANALYSIS ON CONCRETE-ENCASED CFST COLUMN TO REINFORCED CONCRETE BEAM JOINTS

Finite element and analytical modelling of PVC-confined concrete columns under axial compression

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model

ABAQUS modeling for post-tensioned reinforced concrete beams

NONLINEAR FINITE ELEMENT ANALYSIS OF SQUARE CONCRETE-FILLED STEEL TUBE COLUMNS UNDER COMPRESSIVE LOAD

Analytical Behavior of Concrete-Filled Aluminum Tubular Stub Columns under Axial Compression

FINITE ELEMENT ANALYSIS OF MECHANICAL PROPERTIES OF SOLID STEELREINFORCED CONCRETE FRAME WITH SPECIAL-SHAPED COLUMNS

Finite element analyses of failure of fiber reinforced polymer-concrete interface considering the concrete tension–compression softening effect