Effects of Surface Treatment and Shade on the Color, Translucency, and Surface Roughness of High-Translucency Self-Glazed Zirconia Materials
Siyu Li,Xinyue Zhang,Wei Xia,Yihong Liu
DOI: https://doi.org/10.1016/j.prosdent.2022.05.014
2022-01-01
Abstract:Statement of problem. The impact of different surface treatments and shades on the color, translucency, and surface roughness of high-translucency self-glazed zirconia materials is unclear. Purpose. The purpose of this in vitro study was to investigate the effects of different external surface treatments (self-glazed, milled, polished, and glazed), intaglio surface treatments (milled and airborne-particle abraded), and shades (A1 and A3 shades) on the color, translucency, and surface roughness of high-translucency self-glazed zirconia materials, as well as the correlations among optical parameters, translucency, and surface roughness. Material and methods. Eighty shade A1 and 80 shade A3 disks were fabricated with a thickness of 0.80 +/- 0.02 mm and divided into 16 groups (n=10). Different external and intaglio surface treatments were applied to the specimens. CIELab values were measured with a spectrophotometer, and color differences (Delta E-00) and relative translucency parameter (RTP) were calculated. Total transmittance (Tt%) and reflectance (R%) were tested with a spectrophotometer equipped with an integrating sphere. Surface roughness (Ra and Rz) (mu m) was measured with a noncontact 3-dimensional laser scanning microscope. One specimen from each group was subjected to scanning electron microscope (SEM) examination. Data were analyzed with ANOVA and the Tukey post hoc test. The correlation among optical parameters, translucency, and surface roughness was investigated by using Pearson correlation analysis (alpha=.05). Results. The effects of external surface treatments, intaglio airborne-particle abrasion, and shades on Delta E-00, RTP, and Ra values of the disks were significantly different (P<.001). The smoothest external polishing surface had the greatest RTP and color difference (P<.001). Shade A3 disks had lower RTP and Tt% values than shade A1 disks (P<.001). Delta E-00 had a highly positive relationship with the RTP (A1: r=0.884, P<.001; A3: r=0.859, P<.001). SEM images demonstrated that surface treatments affected the surface texture of monolithic zirconia ceramics. Conclusions. Different surface treatments affected the surface roughness, translucency, and final color of zirconia materials. The smoothest external polishing surface had the greatest RTP and color difference. Different shades influenced the translucency, as the darker the disk shade, the lower the translucency. The RTP was appropriate as an auxiliary indicator for evaluating the color of a dental ceramic.