Abstract:In this article, we report on a unique design and build technique based on stereolithographic 3D printing technology (SLA) for constructing ultraviolet cured resin-made micro-reactors. The main objective of this study is gaining insight into the thermal performance of micro-reactors for optofluidic applications. Several micro-reactors equipped with pin fins were manufactured. A high-fidelity test-rig was developed and used to collect data from water flowing in the micro-reactors as they are exposed to various heat flux loading. The measured data was also used for validating the numerical (CFD) models. The CFD models provided in-depth spatial data on the pressure and temperature profiles in the microchannel, which could not be easily measured. The results showed that conventional empirical correlations failed to accurately predict the pressure drop of the system in the microfluidics regime (Re 190). For both regimes, however, CFD results were sufficiently accurate in predicting the temperature and pressure differences across the micro-reactor. It was also identified that pin fins arrangements offer a great design benefit in enhancing heat transfer coefficient in micro-reactors, achieving values up to ∼2300 W/m2.K compared to a plain micro-reactor at ∼1875 W/m2.K (or 300 W/m2.K for conventional combustion systems). A multi-objective optimisation on the geometrical specifications of various pin fins showed that the micro-reactor with pin fins of 250 µm in diameter and 100 µm in height, yielded the best thermo-hydraulic performance of highest thermal transfer coefficient (2100 W/m2.K) and the lowest pressure- drop (∼0.1 kPa) across a wide range of heat flux loadings. The outcome of this study has created a significant knowledge and understanding of the flow behaviour in polymer-based micro-channels. It also established a methodology for designing and optimising the thermal–hydraulic performance of optofluidic micro-reactors, with potential loading of nano-photocatalyst mediated in pin fins sites. New correlations for predicting the pressure drop and temperature difference across polymer-based micro-reactors are also developed.

Hydrodynamics and mass transfer studies on plate‐type microchannel reactor for liquid–liquid systems

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

PRESSURE FLUCTUATIONS OF LIQUID-LIQUID SLUG FLOW IN CROSS-JUNCTION SQUARE MICROCHANNELS

Effect of Mixing on Mass Transfer Characterization in Continuous Slugs and Dispersed Droplets in Biphasic Slug Flow Microreactors

Numerical Modeling of Microchannel Reactor with Porous Surface Microstructure Based on Fractal Geometry

Thermal and flow characteristics of liquid flow in a 3D-printed micro-reactor: A numerical and experimental study

Mass Transfer Phenomena Of Partially Miscible Liquids Under Liquid-Liquid Slug Flow In A Circular Microchannel

Hydrodynamics and Local Mass Transfer Characterization under Gas–liquid–liquid Slug Flow in a Rectangular Microchannel

Gas–liquid–liquid Slug Flow and Mass Transfer in Hydrophilic and Hydrophobic Microreactors

Investigation of Mass-Transfer Performance for Biodiesel Reaction in Microchannel Reactor using Volume-of-Fluid with Species-Transport Model

Microreactor designed for efficient plasma-liquid segmented flows

Mass transfer to reactive boundaries from steady three-dimensional flows in microchannels

Study on Bubbly Flow Behavior in Natural Circulation Reactor by Thermal-Hydraulic Simulation Tests with SF6-Gas and Ethanol Liquid

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

A Detailed Hydrodynamic Study of the Split-Plate Airlift Reactor by Using Non-Invasive Gamma-Ray Techniques

Performance Evaluation of Mass Transport Enhancement in Novel Dual-Channel Design of Micro-Reactors

Liquid-liquid flow pattern and mass transfer in a rotating millimeter channel reactor

Thermal-hydraulics performance evaluation of bubble swarms sweeping tube bundles in a direct contact gas-liquid-solid reactor

Numerical Study of Flow and Heat Transfer Characteristics in a Simplified Dual Fluid Reactor

Effect of Viscosity on Liquid–Liquid Slug Flow in a Step T-Junction Microchannel