Abstract:Thin-gauge non-oriented silicon steel with high strength was successfully processed using strip casting. Texture evolution and strengthening mechanism via nanoscale Cu-rich precipitates were studied to fundamentally understand the balanced combination of magnetic properties and mechanical properties. Coarse equiaxed grains with average size of ∼190 μm and relatively random texture were formed in the as-cast strip, which contributed to the inhomogeneous deformation, resulting in high density of shear bands. Exact Cube was retained from the initial Cube texture and new Goss was formed during the heavy rolling process in the 0.20 mm cold rolled sheet, which promoted relatively strong Cube and Goss texture after recrystallization annealing. The 0.20 mm annealed sheet exhibited high magnetic induction of 1.709 T, which corresponds to the high texture factor of 0.5. The total iron losses were significantly reduced with decrease in thickness, and the P1.5/50, P1.0/400, and P1.0/1000 in 0.20 mm sheet were as low as 2.63, 15.17 and 55.63 W/kg, respectively, which showed a good match between magnetic induction and iron loss. During the aging process, both the magnetic induction and total iron loss exhibited relatively good stability. With increase in aging time, the yield strength first rapidly increased and then slightly decreased. In 0.20 mm sheet, peak yield strength of ∼630 MPa was obtained on aging at 550 °C for 90–120 min. The key mechanism of precipitation strengthening was attributed to the difference in modulus and coherency strain associated with high density of nanoscale precipitates of ∼5 nm. The study revealed that the nanoscale Cu-rich precipitates can be adopted as effective approach to increase the yield strength over ∼100 MPa without deteriorating iron loss in thin-gauge non-oriented silicon steel by strip casting, which guaranteed the balance of magnetic properties and mechanical properties to meet the requirements of high-speed motor.

High‐Strength Nonoriented Electrical Steel with Excellent Magnetic Properties Accomplished by Cu–Ni Multialloying

Effects of Cu Content on Mechanical and Magnetic Properties of High‐Strength Nonoriented Silicon Steel

High-strength low-iron-loss electrical steel accomplished by Cu-rich nanoprecipitates

Microstructure Characteristics and Strengthening Behavior of Cu-Bearing Non-Oriented Silicon Steel: Conventional Process versus Strip Casting

Thin-gauge non-oriented silicon steel with balanced magnetic and mechanical properties processed by strip casting

Improvement of magnetic properties via normalizing annealing for high-strength Fe-4.5wt.%Si electrical steel

Thick-Gauge Ultra-High-Strength High-Silicon Non-Oriented Silicon Steel with Balanced Mechanical and Magnetic Properties Controlled by Partial Recrystallization Annealing

Influence of Annealing Process on Microstructures,Mechanical and Magnetic Properties of Nb-Containing High-Strength Non-Oriented Silicon Steel

Magnetic Performance Improvement Caused by Tensile Stress in Equivalent Iron Core Fabricated by High-Strength Non-Oriented Electrical Steel

Optimum Magnetic Properties of Non-Oriented Electrical Steel Produced by Compact Strip Production Process

Microstructure Evolution and Strengthening Mechanism of FeCo-1.5V0.5Nb0.4 W Soft Magnetic Alloy Rolled Strip with High Yield Strength and Low Coercivity

Large Magnetoresistance in a Directionally Solidified Ni 44.5 Co 5.1 Mn 37.1 in 13.3 Magnetic Shape Memory Alloy

Microstructure evolution and strengthening mechanism of FeCo-1.5V0.5Nb0.4W soft magnetic alloy rolled strip with high yield strength and low coercivity

Ultrastrong and Ductile Soft Magnetic High‐Entropy Alloys via Coherent Ordered Nanoprecipitates

Effect of annealing on magnetic properties of high-manganese non-oriented electrical steel

The cobalt-free Fe35Mn15Cr15Ni25Al10 high-entropy alloy with multiscale particles for excellent strength-ductility synergy

Microstructural evolution and properties of a Cu-Fe-Mn-P alloys with high strength and high conductivity

Microstructure and mechanical properties of a Cu-Fe-Nb alloy with a high product of the strength times the elongation

Improvement of Mechanical Property and Large Shape Recovery of Sintered Ni45Mn36.6In13.4Co5 Alloy

Comprehensive Influence of the Normalized and Final Annealing Process on High‐Strength Nonoriented Silicon Steel