Adaptive low voltage crossing strategy for symmetrical faults of networked inverters

Longfei Mu

DOI: https://doi.org/10.1088/1742-6596/2785/1/012040

2024-07-04

Journal of Physics Conference Series

Abstract:Due to the inability of grid-following control methods to compensate for the comprehensive reduction in system inertia, strength, and short-circuit capacity caused by the decreased proportion of synchronous machines, the grid exhibits insufficient resilience to disturbances, leading to severe stability risks in terms of rotor angle, frequency, and voltage. Grid-forming inverters have emerged to address this issue. During symmetrical faults, the low-voltage ride-through of grid-forming inverters often involves freezing the reactive power loop, resulting in a direct output of higher voltage and reactive current. However, an increase in reactive power command leads to a sharp rise in the internal potential magnitude of grid-forming inverters. Upon clearance of the grid fault, the excessively high internal potential may cause a rapid, short-term increase in terminal voltage, potentially resulting in overvoltage, which is detrimental to the operation of grid-connected equipment. In response to this issue, this paper proposes an adaptive low-voltage ride-through control strategy for grid-forming inverters under symmetrical faults controlled by a virtual synchronous machine control method. Initially, a virtual synchronous machine control model is established. Limiting current is achieved through the construction of a fixed virtual impedance loop. The issues associated with fixed virtual impedance current limiting are analyzed, leading to the proposal of an adaptive virtual impedance control strategy. Finally, the feasibility of the proposed method is verified through simulation experiments.