Abstract:Virtual synchronous generator (VSG) control, which can provide inertia output, damp power oscillations, and offer frequency and voltage support to power grids, has become a growing trend in the control field of wind power generation. As a new technology, there are still challenges that VSG control has not solved well, such as transient overvoltage suppression. A kind of transient overvoltage, which often occurs during the commutation failures of HVDC transmission systems, will trigger a mass of wind turbine generators (WTGs) disconnecting from grids. To reduce the grid-disconnection risk of the virtual synchronous generator control-based doubly fed induction generators (VSG-DFIGs), this paper first analyzes the mechanism of the automatic voltage regulation (AVR) control usually employed by VSG-DFIGs, then proposes measures to suppress the transient overvoltage. To solve the problem of the reactive power response lag issued by VSG-DFIGs, which will further aggravate the transient overvoltage in continuous low and high voltage faults, the time constant of the AVR control is switched. To fully exploit the potential of the DFIGs' reactive power support, the droop coefficient of the AVR control is switched during the abnormal voltage stages. The switched droop coefficient will change the rotor excitation current magnitude, thus adjusting the internal potential of a DFIG, finally better supporting or suppressing the terminal voltage during the low or high voltage periods. Simulation results based on the DIgSILENT/PowerFactory platform demonstrate that the proposed method can effectively suppress the transient overvoltage that occurs in continuous low and high voltage events caused by the commutation failures of HVDC transmission systems, reducing the number of WTGs disconnecting from the grids.

Improved VSG Control Strategy for Wind Turbines Connected to Non-Synchronized Grid under Commutation Failure

Modeling and Overvoltage Suppression Analysis of Grid-connected Converter with VSG Control Strategy under Commutation Failure

Improved Power Decoupling Control Strategy Based on Virtual Synchronous Generator

Current Saturation Analysis and Anti-Windup Control Design of Grid-Forming Voltage Source Converter

Optimal Power Coordinated Control Strategy for DFIG-Based Wind Farm to Increase Transmission Capacity of the LCC-HVDC System Considering Commutation Failure

Control Strategy Based on Virtual Synchronous Generator of DFIG-based Wind Turbine under Unbalanced Grid Voltage

Overvoltage Suppression Strategy for Sending AC Grid With High Penetration of Wind Power in the LCC-HVdc System Under Commutation Failure

Overvoltage ride through control strategy for improving voltage support capability of virtual synchronous generator

Overvoltage Suppression Strategy for VSG-Based DFIGs Under Commutation Failures of HVDC Transmission Systems

Improved Virtual Synchronous Generator Control of DFIG to Ride-Through Symmetrical Voltage Fault

A Novel Fault Ride Through Strategy for Grid-Connected Virtual Synchronous Generators: Power Angle Stability Enhancement and Current Limiting

Optimal Power Distribution Method for Wind Farms to Enhance the FRT Capability of the LCC-HVDC System under Commutation Failure

Synchronization Strategy for Virtual Synchronous Generator Based Energy Storage System

Improved Virtual Synchronous Generator Control of DFIG under Symmetrical Drop of Grid Voltage

Coordinated Control of Voltage Ride Through for DFIG Wind Turbine Systems Using Energy-based DVR

Transient Voltage Control of Sending-End Wind Farm Using a Synchronous Condenser Under Commutation Failure of HVDC Transmission System

Control Strategies of Grid-Connected Wind Farm Based on Virtual Synchronous Generator

A Stabilization Control Strategy for Wind Energy Storage Microgrid Based on Improved Virtual Synchronous Generator

A Method to Improve Both Frequency Stability and Transient Stability of Virtual Synchronous Generators during Grid Faults

Improved control of virtual synchronous generator under unbalance of grid voltage

High Voltage Ride-Through Control Strategy of Grid-Side Converter for DFIG-based WECS.