Abstract:Ansys Fluent software is used to design a gas–liquid cylindrical cyclone and horizontal separator combination device, the most effective oil field device. The characteristics of gas–liquid mixed flow, fluid turbulence intensity, and phase volume fraction distribution are analyzed, and the factors affecting the gas–liquid separation efficiency are evaluated under different working conditions. The results can help ensure the engineering design and operating condition. Currently, computational fluid dynamics has become the primary method for analyzing the fluid flow state inside the machine. Herein, the Ansys Fluent software is used to design a more effective oil‐field device, namely, a gas–liquid cylindrical cyclone (GLCC)‐horizontal combined separator. The characteristics of gas–liquid mixed flow, fluid turbulence intensity, and phase volume fraction distribution are analyzed, and the factors affecting the gas–liquid separation efficiency are evaluated under various working conditions. The results show that low gas–liquid separation efficiencies are obtained at inlet liquid ratios (liquid proportion in fluid) of both 30% and 70% in GLCC. After the fluid enters the separator, the maximum level of turbulence in the collision area increases from 2.458 to 3.033 m2/s2 as the inlet liquid ratio is increased from 30% to 70%, with the generation of oil–water and gas–liquid stratification at the back. Furthermore, the maximum gas holdup in the liquid outlet increases from 7% to 12% to 25% as the liquid ratio is increased from 30% to 50% to 70%. With throttling at a liquid ratio of 70%, the maximum gas holdup is again close to 14%.

The Analysis of Gas-liquid Separation Technology Research Progress

Progress in Application of Immobilized Ionic Liquid for Gas Separation

Technologies of Separating Alkene from Refinery Dry Gas

A review of gas-liquid separation technologies: Separation mechanism, application scope, research status, and development prospects

Energy-efficient separation alternatives: metal-organic frameworks and membranes for hydrocarbon separation.

Research on the Performance of a Passive Gas-Liquid Separator Used in Space

Gas Separation Based on Ionic Liquids

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Experimental Study on Two Different Gas-Liquid Separators Under Different Flow Patterns

Research Progress of Membrane Contactor for Gas Separation

Simulation research on the flow field performance of the supersonic separator for natural gas

Experimental Study on a New Type of Separator for Gas Liquid Separation

Research on Separation Mechanism of Liquid-Solid Fluidized Bed Separator

Research progress of separation technologies for alcohol-water system

Experimental study on a new gas–liquid separator for a wide range of gas volume fraction

Recent progress on coal-based liquid oil separation technology

Novel Membrane Contactors Used in Waste Gas/Liquid Separation

Technologies and Applications of Pipeline-type Oil-gas-water Separation

Numerical simulation on gas–liquid separation characteristics in a GLCC‐horizontal combined separator

Experimental Study on a New Combined Gas–Liquid Separator

Separation mechanism and influential factor study on vane-type-associated petroleum gas separator