Numerical simulation on gas–liquid separation characteristics in a GLCC‐horizontal combined separator

Hongtao Ma,Shuhao Zhang,Yuxing Li
DOI: https://doi.org/10.1002/ese3.1266
2022-08-05
Abstract:Ansys Fluent software is used to design a gas–liquid cylindrical cyclone and horizontal separator combination device, the most effective oil field device. The characteristics of gas–liquid mixed flow, fluid turbulence intensity, and phase volume fraction distribution are analyzed, and the factors affecting the gas–liquid separation efficiency are evaluated under different working conditions. The results can help ensure the engineering design and operating condition. Currently, computational fluid dynamics has become the primary method for analyzing the fluid flow state inside the machine. Herein, the Ansys Fluent software is used to design a more effective oil‐field device, namely, a gas–liquid cylindrical cyclone (GLCC)‐horizontal combined separator. The characteristics of gas–liquid mixed flow, fluid turbulence intensity, and phase volume fraction distribution are analyzed, and the factors affecting the gas–liquid separation efficiency are evaluated under various working conditions. The results show that low gas–liquid separation efficiencies are obtained at inlet liquid ratios (liquid proportion in fluid) of both 30% and 70% in GLCC. After the fluid enters the separator, the maximum level of turbulence in the collision area increases from 2.458 to 3.033 m2/s2 as the inlet liquid ratio is increased from 30% to 70%, with the generation of oil–water and gas–liquid stratification at the back. Furthermore, the maximum gas holdup in the liquid outlet increases from 7% to 12% to 25% as the liquid ratio is increased from 30% to 50% to 70%. With throttling at a liquid ratio of 70%, the maximum gas holdup is again close to 14%.
energy & fuels
What problem does this paper attempt to address?