Abstract:Standard fire resistance tests and post-fire tests on residual mechanical properties were carried out on two four-edge simply supported reinforced truss concrete two-way composite slabs with wide seam splicing ("integral seam") and close seam splicing ("separated seam"), and the effects of the different splicing forms on the mechanical properties of the reinforced truss concrete composite slabs during and after exposure to high temperatures were explored. The results indicate that there are significant differences in terms of crack developments, moisture loss times on the slab surface, spalling characteristics of the bottom of the slab and cross-section temperature gradients of concrete and steel reinforcement along the thickness direction between the wide seam spliced reinforced truss concrete composite two-way slab (referred to as "S1 composite slab") and the close seam spliced reinforced truss concrete composite two-way slab (referred to as "S2 composite slab") in the fire test. This is mainly due to differences in the splicing forms and structural measures of the prefabricated base slabs at joints, which led to changes in the heat transfer path at the joints. As the temperature at the close seam can be released quickly, the stiffness recovery of the S2 composite slab is significantly greater than the stiffness weakening due to the thermal hysteresis of the concrete, so the deflection of the S2 composite slab recovers immediately after the fire stops. Overall, both the S1 and S2 composite slabs exhibit two-way high temperature deformation characteristics. The post-fire residual static load tests show that the static load-carrying capacity of the S1 composite slab is 12.08% higher than that of the S2 composite slab and the ultimate displacement is 8.74% lower than that of the S2 composite slab. It is appropriate to calculate the residual load capacities of the S1 and S2 composite slabs after the fire as a one-way slab.

Effect of cracking and residual deformation on behavior of concrete beams with different scales under fire exposure

Shear Tests of Reinforced Concrete Beams with the Influence of Initial Shear Cracks

INCORPORATING PRE-EXISTING CRACKS IN STRUCTURAL ASSESSMENT OF RC STRUCTURES

Effects of sustained axial load and cooling phase on post-fire behaviour of reinforced concrete stub columns

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Effects of preload and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Effects of sustained axial load and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Influence of Longitudinal Bar Corrosion on Impact Behavior of RC Beams

Experimental Study on Axial Mechanical Behavior of Reinforced Concrete Stub Columns with Pre-Load after Exposure to High Temperatures

Cyclic Behaviours Of Concrete-Filled Steel Tubular Columns With Pre-Load After Exposure To Fire

Experimental and Numerical Study on the Behavior of Reinforced Concrete Deep Beams with Normal-Strength and High-Strength Concrete After Being Exposed to Fire

Mechanical Properties of Full-Scale Prestressed Concrete Beams with Thin Slab after Exposure to Actual Fire

Experimental and Analytical Investigation of Crack Spacing and Width for Overlaid RC Beams at Elevated Temperatures

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Residual Shear Capacity of Post-Fire RC Beams under Indirect Loading

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

Damage Evolution Of Rc Beams Under Simultaneous Reinforcement Corrosion And Sustained Load

Experimental and numerical study on multi-impact performance of pre-damaged beams strengthened with CFRP

Experimental investigation on the effect of natural fire exposure on the post‐fire behavior of reinforced concrete beams using electric radiant panel

Experimental Study on the Structural Performance of Reinforced Truss Concrete Composite Slabs during and after Fire