Abstract:[Continuous mixing equipment is widely used in polymer processing. Typical continuous mixers include single screw and twin screw extruders. The flow field in these mixing devices is difficult to analyze due to the complex geometry. In this work, a fluid dynamics analysis package-FIDAP, using the finite element method, was implemented to simulate the three dimensional, isothermal flow patterns in the region of conveying elements and shearing discs of a Leistritz intermeshing counterrotating twin screw extruder model LSM30.34, a 2{dollar}{bsol}sp{lcub}{bsol}prime{bsol}prime{rcub}{dollar} Welding Engineers tangential counterrotating twin screw extruder and the MCT section of a Multi-Cut Transfermix extrusion system. The rheology of the fluid was described by a power-law model. The problem of time dependent flow boundaries was solved by selecting a number of sequential geometries to represent a complete mixing cycle. The dispersive mixing in the region of conveying elements and shearing discs of the intermeshing counterrotating twin screw extruder was characterized in terms of shear stresses generated in the flow field and a parameter {dollar}{bsol}beta{dollar} quantifying the elongational flow components. The influence of screw rotational speed and axial pressure difference on these flow characteristics was analyzed. Comparisons of the flow characteristics in the regio n of conveying elements and in the shearing discs, and between corotating and counterrotating modes in the shearing discs were also presented. A framework was developed to evaluate distributive mixing efficiency in the intermeshing and tangential counterrotating twin screw extruders and in the Multi-Cut Transfermix. The dynamics of distributive mixing was studied numerically by means of tracking the evolution of particles originally gathered as clusters. The extent or goodness of mixing was characterized in terms of length stretch, pairwise correlation function and volume fraction of islands. The length stretch reflects the capability of the mixer to spread particles away from their neighbors initially present in the same cluster. The pairwise correlation function characterizes the global distribution of particles in the mixing region. The volume fraction of islands quantifies the regions void of minor component and provides a more local mixing analysis. This framework can then be used to differentiate among various operating conditions or various designs of the same type of equipment. Moreover, this framework can also be applied to other batch or continuous mixing equipment with some minor modifications]

Analysis of flow characteristics of continuous cementing slurry mixing system

Numerical investigation on the intensification of coaxial slurry mixing systems

Numerical Simulation of Mixing Capability in Coal-Slurry Mixing Tank

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

Development on Test Equipment of Coal Slurry Mixing Tank

Review of Numerical Simulation Research on Submersible Mixer for Sewage

Effect of Suction and Discharge Conditions on the Unsteady Flow Phenomena of Axial-Flow Reactor Coolant Pump

Research on the Characteristics of the Solid–Liquid Two-Phase Flow Field of a Submersible Mixer Based on CFD-DEM

Research on Cement Slurry Using Silica Fume Instead of Fly Ash

Numerical Simulation of Transient Flow Patterns of Upper Swirls in Continuous Slab Casting Moulds

Analysis of Mixing Efficiency in Continuous Polymer Processing Equipment

A Study on Liquid‐liquid Dispersions in a Continuous Mixer Via Computational Fluid Dynamics (CFD) Simulation Combined with Population Balance Model (PBM)

Numerical Simulation of Flow Field in the Slurry Pond of a Flue-Gas Desulfurization Tower

Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold

Influence of the flocculation effect on the rheological properties of cement slurry

Flow analysis in right-angled pipes with different geometric shapes and parameters for sludge discharge in slime shield machines measured using a CFD-DEM method

Numerical study on cylindrical particle solid–liquid two-phase flow in a slurry pump

Modeling and Simulation of the Fluid Flow in Continuous Slab Casting Mould

Solid-liquid two-phase flow and wear analysis in a large-scale centrifugal slurry pump

Material Transport and Flow Pattern Characteristics of Gas–Liquid–Solid Mixed Flows