Abstract:Due to the increase of large irregular pebbles in the pipeline system during slurry shield tunneling in sandy pebble stratum, the transportation of the muck is particularly complicated. In this study, a pipeline test system was designed and a three-dimensional transient slurry-pebble numerical model was established based on computational fluid dynamics-discrete element method (CFD-DEM) coupling method to grasp the flow characteristics of slurry shield pipeline system, which involves three aspects: the pebbles critical velocity, the pipe pressure drop and the pebbles movement trajectory. In the model test, the CMC slurry was assumed as the carrying liquid and the hypothesis was verified. In the validated CFD-DEM coupling model, the rheology of slurry and the shape of large irregular pebble were considered via rheological tests and 3D scanning technology respectively. The results indicate that, firstly the critical velocity of pebble increases and then decreases with the increase of equal volume particle size under the same shape of pebbles and pipe inclined angle, and the critical velocity of ellipsoidal pebbles is greater than flattened than subspherical for the different shape pebbles under the same particle size and pipe inclined angle; Secondly, for horizontal straight pipe, the pressure drop increases exponentially with the increase of slurry velocity, and the effect of the particle gradation of the pebbles on the pressure drop in the pipe is not significant, for inclined straight pipe, the pressure drop of the pipeline increases slowly first but then increases sharply with the increasing inclined angle, the turning point is the pipe inclination angle of 60°. Thirdly, the migration of large pebbles in the pipeline is mainly manifested in three forms: sliding, rolling and jumping, and different pebbles have different migration patterns in different pipelines.

Flow analysis in right-angled pipes with different geometric shapes and parameters for sludge discharge in slime shield machines measured using a CFD-DEM method

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Analysis and Inspection on Siltation of Intercepting Combined Sewer System

Study of the hydraulic transport of non-spherical particles in a pipeline based on the CFD-DEM

Investigation into the flow characteristics of slurry shield pipeline system under sandy pebble stratum: Model test and CFD-DEM simulation

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

Numerical Simulations of Liquid-Solid Flows in A Vertical Pipe by MPS-DEM Coupling Method

Numerical simulation for solid-liquid two-phase flow in discharge pipeline and flange connection by CFD-DEM coupling

Optimization research on the layout of scouring pipes in the slurry shield based on CFD-DEM simulation

CFD-DEM Modelling of Hydraulic Conveying of Solid Particles in a Vertical Pipe

Method for calculating pressure losses in the pipelines of slurry shield tunneling based on coupled simulation of computational fluid dynamics and discrete element method

Investigation on the Erosion Characteristics of Liquid–Solid Two-Phase Flow in Tee Pipes Based on CFD-DEM

Evaluating the effectiveness of CFD-DEM and SPH-DEM for complex pipe flow simulations with and without particles

CFD-DEM investigation of centrifugal slurry pump with polydisperse particle feeds

An algorithm combining sedimentation experiments for pipe erosion investigation

Numerical Investigation of Pipeline Transport Characteristics of Slurry Shield under Gravel Stratum

A Coupled Cfd-Dem Simulation Of Slurry Infiltration And Filter Cake Formation During Slurry Shield Tunneling

A Cfd-Dem Coupled Method Incorporating Soil Inter-Particle Rolling Resistance

Numerical experimentation on flow resistance of coal-water slurry in curved pipes

Assessment on the reverse circulation performance of slurry shield pipeline system assisted with CFD-DEM modeling under sandy cobble stratum

Particle shape and clogging in fluid-driven flow: A coupled CFD-DEM study