Abstract:The settling process of cohesive sediment particles exists universally in nature and many engineering fields. Some of them have negative impacts, e.g., leading to the storage loss of reservoir, prolonging the duration of the reclamation project. Thus, understanding and quantifying cohesive sediments settling and flocculation processes are of great importance. In the present work, a three-dimensional model is applied to investigate the cohesive settling process numerically by computational fluid dynamics–discrete element method (CFD–DEM) approach. In the model, the cohesiveness of the sediment particle is modeled by implementing the van der Waals force. The simulation results are in good agreement with the experimental results, which demonstrate the ability of the current model to study the settling and flocculation process. For cohesive particles, the influence of polydispersity on structural density is discussed in two aspects: (a) the particle mean diameter d50 and (b) the geometric standard deviation d85/d15. Furthermore, the results show that the influence of these two parameters is more profound when a large Hamaker constant is applied. We also study the relationship between the maximum value of structural density and the Hamaker constant. The structure density is found to be significantly influenced by Hamaker constant when Hamaker constant is smaller than \(2.0\, \times \,10^{ - 20} \,{\text{J}}\). Besides, for the poly-dispersed system, different from non-cohesive particles, the segregation phenomenon is not obvious for poly-dispersed cohesive particles due to the flocculation phenomenon. Moreover, the excessive pore pressure in sediment bed does not dissipate instantaneously as the non-cohesive sediment bed. And with the increase of the Hamaker constant, the excessive pore pressure dissipation velocity of the sediment bed decreases. In this work, we study the flocculation phenomenon of cohesive particles. It’s found that the influence of cohesive force is more significant on small particles. Since with the reduction of the particle size, the inertial force decreases to a greater extent compared to the cohesive force, the particles’ motion is mainly determined by the cohesive force.

Particle shape and clogging in fluid-driven flow: A coupled CFD-DEM study

Investigating the Jamming of Particles in a Three-Dimensional Fluid-Driven Flow Via Coupled CFD–DEM Simulations

Microscopic origins of shape effects on migration and clogging of fines in porous media using coupled CFD-iDEM

An unresolved CFD-DEM method for studying migration and clogging of fine particles through a packed bed

Study of the hydraulic transport of non-spherical particles in a pipeline based on the CFD-DEM

Clogging effect of fines in seepage erosion by using CFD–DEM

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

CFD-DEM Modelling of Hydraulic Conveying of Solid Particles in a Vertical Pipe

Studying the Orifice Jamming of a Polydispersed Particle System Via Coupled CFD–DEM Simulations

Modeling the Process of Cohesive Sediment Settling and Flocculation Based on CFD–DEM Approach

CFD-DEM Coupling Model for Deposition Process Analysis of Ultrafine Particles in a Micro Impinging Flow Field

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Simplified level set discrete element modeling of particle suspension flows in microfluidics: clogging statistics controlled by particle friction and shape

CFD-DEM Simulation of Fluidization of Polyhedral Particles in a Fluidized Bed

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Particle clogging mechanisms in hyporheic exchange with coupled lattice Boltzmann discrete element simulations

The effect of particle shape on discharge and clogging

Particle deposition and clogging as an Obstacle and Opportunity for sustainable energy

Numerical Simulation of the Accumulation of Heavy Particles in a Circular Bounded Vortex Flow

Mechanisms of Pore-Clogging Using a High-Resolution CFD-DEM Colloid Transport Model