Abstract:Selective catalytic NH3-to-N2 oxidation (NH3-SCO) is highly promising for abating NH3 emissions slipped from stationary flue gas after-treatment devices. Its practical application, however, is limited by the non-availability of low-cost catalysts with high activity and N2 selectivity. Here, using defect-rich nitrogen-doped carbon nanotubes (NCNT-AW) as the support, we developed a highly active and durable copper-based NH3-SCO catalyst with a high abundance of cuprous (Cu+) sites. The obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T50 (i.e. the temperature to reach 50% NH3 conversion) of 174°C in the NH3-SCO reaction, which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs (OCNTs) or NCNT with less surface defects, but also those most active Cu catalysts in open literature. Reaction kinetics measurements and temperature-programmed surface reactions using NH3 as a probe molecule revealed that the NH3-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction (i-SCR) route involving nitric oxide (NO) as a key intermediate. According to mechanistic investigations by X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray absorption spectroscopy, the superior NH3-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and N-dopants. Specifically, surface defects promoted the anchoring of CuO nanoparticles on N-containing sites and, thereby, enabled efficient electron transfer from N to CuO, increasing significantly the fraction of SCR-active Cu+ sites in the catalyst. This study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu+-rich Cu catalysts for efficient abatement of slip NH3 emissions via selective oxidation.

Ag Size/Structure-Dependent Effect on Low-Temperature Selective Catalytic Oxidation of NH 3 over Ag/MnO 2

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Study on the Effect and Mechanism of Support Structure and Characteristic on Ag-based Catalysts for Low-Temperature Selective Catalytic Oxidation of Ammonia

Understanding the Distinct Effects of Ag Nanoparticles and Highly Dispersed Ag Species on N 2 Selectivity in NH 3 –SCO Reaction

Identifying the reaction network complexity and structure sensitivity of selective catalytic oxidation of ammonia over Ag surfaces

Mixed Catalyst SmMn2O5/Cu-SAPO34 for NH3-Selective Catalytic Oxidation

Promoting effect of Cu as electron transfer medium on NH3-SCO reaction in asymmetric Ag-Ov-Ti-Sm-Cu ring active site

Selective catalytic oxidation of ammonia over AMn2O5 (A = Sm,Y,Gd) and reaction selectivity promotion through Nb decoration

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts

Excellent low temperature NH3-SCR and NH3-SCO performance over Ag-Mn/Ce-Ti catalyst: Evaluation and characterization

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

A Highly Effective Catalyst of Sm-Mn Mixed Oxide for the Selective Catalytic Reduction of Nox with Ammonia: Effect of the Calcination Temperature

Synthesis, Characterization and Catalytic Performance of Femntiox Mixed Oxides Catalyst Prepared by A Ctab-Assisted Process for Mid-Low Temperature Nh3-Scr

Selective catalytic oxidation of ammonia to nitrogen over zeolite-supported Pt-Au catalysts: Effects of alloy formation and acid sites

Low Temperature Selective Catalytic Reduction of NOx with NH3 over Amorphous MnOx Catalysts Prepared by Three Methods

Study on Effect of Calcination and Ag Loading on Ag/TiO2 Catalyst for Low-Temperature Selective Catalytic Oxidation of Ammonia

Structural Properties of PtCuO/Al2O3 surface catalyst for selective NH3 oxidation using operando spectroscopy

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal

Effect of Nb‐doping on the MnFeOx catalyst for NH3‐SCR reaction at low‐temperature

Optimization of catalytic activity of MnCoOx catalyst for NH3–SCR at low temperature by response surface method