Abstract:Yttria-stabilized zirconia (YSZ)/gadolinia-doped ceria (GDC) dual-layered electrolytes have promising potential in solid oxide fuel cells (SOFCs) to prevent the destroying reaction of the lanthanum-containing cathode with ZrO2 base electrolyte and improve ionic conduction by blocking ceria based electrolyte electronic conduction. Preparation of the YSZ/GDC electrolyte is problematic due to the formation of a high electrical resistance interdiffusion layer at high sintering temperatures. Flash sintering (FS) is a promising method for sintering materials at low temperatures and short times. Herein, FS is used to limit the interdiffusion layer. The green dual-layered electrolytes are prepared by YSZ tape casting and coating the GDC layer on the binder-burnout YSZ layer by wet spraying method. The effect of electric field strength (E) and current density (J) on the interdiffusion layer thickness is investigated by the response surface methodology (RSM). The interdiffusion layer thickness in the electrolytes is determined using elemental distribution curves across the YSZ/GDC interface using a scanning electron microscope (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS). Response surface of interdiffusion layer thickness shows that the electric field strength is more effective in the interdiffusion layer propagation than the current density. By controlling the electric field strength and current density, the interdiffusion layer is limited and descends from 45 µm for E = 300 V/cm and J = 200 mA/mm2 to 1 µm for E = 80 V/cm and J = 200 mA/mm2 as the optimum FS parameters. Electrochemical impedance spectroscopy (EIS) results show improved electrical conduction in optimal flash sintered electrolytes compared with conventionally sintered ones due to the thinner interdiffusion layer. The SOFC single cell is made using the optimal flash sintered YSZ/GDC electrolyte, which shows a performance of 0.3 W/cm2 at 800 °C, about 15% higher than the SOFC single cell made by conventionally sintered YSZ/GDC electrolyte.

Fused filament fabrication and characterisation of 3- and 8-YSZ-based SOFC electrolytes

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

3D Printing of Robust 8YSZ Electrolytes with a Hyperfine Structure for Solid Oxide Fuel Cells

Three-dimensional printed yttria-stabilized zirconia self-supported electrolytes for solid oxide fuel cell applications

Fabrication and Characterizations of Ysz Electrolyte Films for Sofc

Fabrication and Performance of Anode-Supported Electrolyte Thin Films SOFCs

Fabrication, Microstructure and Properties of A Ysz Electrolyte for Sofcs

Electrophoretic deposition of YSZ thin-film electrolyte for SOFCs utilizing electrostatic-steric stabilized suspensions obtained via high energy ball milling

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Preparation of Thin Electrolyte Film Via Dry Pressing/heating/ Quenching/calcining for Electrolyte-Supported SOFCs

Additive manufacturing of thin electrolyte layers via inkjet printing of highly-stable ceramic inks

A new and simple way to prepare monolithic solid oxide fuel cell stack by stereolithography 3D printing technology using 8 mol% yttria stabilized zirconia photocurable slurry

Scalable and facile fabrication of tri-layer electrolytes by reactive sputtering for efficient and durable solid oxide fuel cells

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Facile preparation of patterned anode substrate for solid oxide fuel cells by direct-writing 3D printing technology

Electrophoretic Deposition in the Preparation of Electrolyte Thin Films for Solid Oxide Fuel Cells

Controlling Yttria-stabilized zirconia/gadolinia-doped ceria interdiffusion layer in the solid oxide fuel cell electrolyte via flash sintering method

Synthesis and Characterization of Gadolinium-Doped Zirconia as a Potential Electrolyte for Solid Oxide Fuel Cells

Fabrication and Characterization of Composite Electrolyte for Intermediate-Temperature SOFC

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell