Abstract:In this study, integrated experimental tests and computational modeling are proposed to investigate the failure mechanisms of open-hole cross-ply carbon fiber reinforced polymer (CFRP) laminated composites. In particular, we propose two effective methods, which include width-tapered double cantilever beam (WTDCB) and fixed-ratio mixed-mode end load split (FRMMELS) tests, to obtain the experimental data more reliably. We then calibrate the traction-separation laws of cohesive zone model (CZM) used among laminas of the composites by leveraging these two methods. The experimental results of fracture energy, i.e. G Ic and G Tc , obtained from WTDCB and FRMMELS tests are generally insensitive to the crack length thus requiring no effort to accurately measure the crack tip. Moreover, FRMMELS sample contains a fixed mixed-mode ratio of G IIc /G Tc depending on the width taper ratio. Examining comparisons between experimental results of FRMMELS tests and failure surface of B-K failure criterion predicted from a curve fitting, good agreement between the predictions and experimental data has been found, indicating that FRMMELS tests are an effective method to determine mixed-mode fracture criterion. In addition, a coupled experimental-computational modeling of WTDCB, edge notched flexure, and FRMMELS tests are adopted to calibrate and validate the interfacial strengths. Finally, failure mechanisms of open-hole cross-ply CFRP laminates under flexural loading have been studied systematically using experimental and multi-scale computational analyses based on the developed CZM model. The initiation and propagation of delamination, the failure of laminated layers as well as load-displacement curves predicted from computational analyses are in good agreement with what we have observed experimentally.

Validation of the fully rationalized Tsai-Wu failure criterion for unidirectional laminates under multiaxial stress states through a ring-on-ring test

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

A theoretical and experimental assessment of 3D macroscopic failure criteria for predicting pure inter-fiber fracture of transversely isotropic UD composites

Stress Invariants and Invariants of the Failure Envelope as a Quadric Surface: Their Significances in the Formulation of a Rational Failure Criterion

Buckling and material failure analyses for ring-stiffened composite shells subjected to hydrostatic pressure

Modelling of ductile fracture in ship structures subjected to quasi-static impact loads

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

The competition between buckling and overstress failure of composite laminated plates in compression and shear loads

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

An efficient and accurate framework to determine the failure surface/envelop in composite lamina

A transverse failure criterion for unidirectional composites based on the Puck failure surface theory

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

Why not Designing Multidirectional Laminates with In-Plane Strength Design Sheets Applying the UD Criteria of TSAI–WU and Cuntze? Part1: Analytical Foundation

Multi-failure theory of non-uniformly ring-stiffened composite shells under hydrostatic pressure

Analytical Prediction and Numerical Verification of Stress Concentration Profile Around an In-situ Tow Break in Resin-impregnated Filament-wound Composites

A New Stress-Based Formulation for Modeling Notched Fiber-Reinforced Laminates

Why not Designing Multidirectional Laminates with In-Plane Strength Design Sheets Applying the UD Criteria of Tsai–Wu and Cuntze? Part2: Application

An Improved Longitudinal Failure Criterion for UD Composites Based on Kinking Model

Redefinition of failure envelope of composite materials considering uncertainty of test data