Abstract:Nickel-titanium shape memory alloy is a novel material with outstanding properties suitable for biomedical applications such as implantation devices. Unfortunately, the high composition of nickel in this alloy can be harmful to the human body, if its exposure exceeds a threshold value. Therefore, an innovative electrical discharge coating technique was investigated and proposed in this study to develop minimal microdefect formation with high corrosion resistance through fractional factorial design of experiment. The results showed that discharge duration mostly dominated the material deposition, microcracks, and porosity fraction up to 72%, due to the impact of the intensity of discharge energy. There was also a pronounced effect of titanium powder concentration in the deionized water on the percentage of titanium and nickel elements and microcrack formation. The powder suspension enhanced the recast layer formation through the increment of layer density, which covered up the Ni-rich region and diminished the microcrack formation. An optimized substrate recorded the lowest corrosion current, , and highest corrosion voltage, , at 3.43 × μA/cm 2 and − 0.07 V respectively, thus exhibiting an outstanding corrosion resistance rate at only 8.57 μm/year in phosphate-buffered saline solution, due to the low nickel concentration, low microcracks, and low porosity fraction in the recast layer. Therefore, the results obtained within this styud presented an initial step towards assessing the feasibility of applying the electrodischarge process to biomaterials, including nickel-titanium shape memory alloy. Further exploration, involving both in-vitro and/ or in-vivo studies, is essential to thoroughly evaluate the performance of the coating obtained from the process.

Investigation into microdefects and corrosion resistance of nickel-titanium shape memory alloy using electrical discharge coating process

Surface modification and biocompatibility of medical nickel-titanium shape memory alloys

Electrochemical and surface characterization of a nickel–titanium alloy

Silver and Copper Coating Effects on Surface Morphology, Crystal Structure and Corrosion Behavior of NiTinol Shape Memory Alloy Plate

In vitro corrosion behavior of nano-multilayered TiN/Ti coated NiTi alloy

Electrochemical corrosion response of ZrN coated Nickel-Titanium alloy in 0.9% NaCl solution

Mechanical Properties, Bioactivity and Corrosion Resistance of Oxygen and Sodium Plasma Treated Nickel Titanium Shape Memory Alloy

The corrosion resistance and biomineralization of the DCPD-PCL coating on the surface of the additively manufactured NiTi alloy

In Vitro Corrosion Inhibition on Biomedical Shape Memory Alloy by Plasma-Polymerized Allylamine Film

Carbon-Based Nanostructured Coatings On Niti Shape Memory Alloy For Biomedical Applications

In vitro and in vivo characterization of novel plasma treated nickel titanium shape memory alloy for orthopedic implantation

Electrical discharge shape memory alloying of Ti-6Al-4V: Mechanisms and mechanical properties

Processing Characteristics of Micro Electrical Discharge Machining for Surface Modification of TiNi Shape Memory Alloys Using a TiC Powder Dielectric

Improved corrosion resistance and cytotoxicity of nickel‐based alloy using novel plasma processing technique

Surface Modification of Dental Nickel-Titanium Shape Memory Alloys

Electrochemical Stability of Orthopedic Porous NiTi Shape Memory Alloys Treated by Different Surface Modification Techniques

PVA/gelatin-based hydrogel coating of nickel-titanium alloy for improved tissue-implant interface

The Corrosion Resistance, Biocompatibility and Biomineralization of the Dicalcium Phosphate Dihydrate Coating on the Surface of the Additively Manufactured NiTi Alloy

Microstructure, Nickel Suppression and Mechanical Characteristics of Electropolished and Photoelectrocatalytically Oxidized Biomedical Nickel Titanium Shape Memory Alloy

Plasma Surface Modification of Nickel Titanium Shape Memory Alloys

Modifying NiTi shape memory alloys to reduce nickel ions release through ethylenediamine plasma polymerization for biomedical applications