Abstract:Recent efforts to develop materials for biomedical applications, such as rigid implants, have focused on improving biocompatibility, and obtaining equivalent microstructure and mechanical properties. However, due to the complex biological environment of the human body, materials often fail in one or more of their required properties. In this study, we examined the mechanical and electrochemical behavior of Ti base alloys combined with Nb and Sn. Titanium-niobium-tin alloys of composition Ti - 30Nb, Ti - 30Nb - 6Sn, Ti - 30Nb - 9Sn and Ti - 30Nb - 12Sn were synthesized by mechanical alloy of powders and thermally sintered. The alloys were characterized microstructurally and mechanically. Subsequently, the corrosion of alloys in Hank's solution by electrochemical techniques was assessed. The characterization results showed that the alloy microstructure is composed by a major β - Ti phase rich in Nb and Sn, and minor α - Ti phase containing less Nb and Sn. The microstructural porosity observed was similar between the alloys, except for the Ti - 30Nb - 6Sn alloy, which presented less porosity. Electrochemical results showed polarization associated with the microstructural characteristics of alloys, particularly their porosity and density. Consequently, the Ti - 30Nb - 6Sn alloy presented the lowest corrosion current density ( i corr ) due to having the lowest exposed surface area. However, the higher porosity present in the other alloys promoted of increase in their i corr values. Ti - Nb based alloys showed either passive or limited current density behaviour, due to the formation of TiO 2 , Nb 2 O 5 and SnO 2 . According to the EIS results, the corrosion mechanisms in Hank ́s solution, were controlled by resistive-capacitive impedance and by diffusion through the oxide layer. Optical microscopy, scanning electron microscopy and x-ray diffraction characterizations, were used to complement the results.

Electrochemical corrosion response of ZrN coated Nickel-Titanium alloy in 0.9% NaCl solution

Electrochemical and surface characterization of a nickel–titanium alloy

A Study Of Zrn/Zr Coatings Deposited On Niti Alloy By Piiid Technique

Corrosion Behavior on Orthopedic NiTi Alloy with Nanocrystalline/amorphous Surface

Investigation into microdefects and corrosion resistance of nickel-titanium shape memory alloy using electrical discharge coating process

Corrosion Behavior of Zrn/Zr Coated Biomedical Az91 Magnesium Alloy

Electroplating and Physicochemical Properties of Zinc–Nickel Alloy Coatings from Ammonium Oxalate Electrolytes

Electrochemical Corrosion Behaviour of Ti44Ni47Nb9 Alloy in Simulated Body Fluids

Corrosion Behaviour of Ti–Nb–Sn Shape Memory Alloys in Different Simulated Body Solutions

Electrochemical Corrosion Behavior of Biomedical Ti–22Nb and Ti–22Nb–6Zr Alloys in Saline Medium

Electrochemical and biological characterization of Ti–Nb–Zr–Si alloy for orthopedic applications

Mechanical Properties, Bioactivity and Corrosion Resistance of Oxygen and Sodium Plasma Treated Nickel Titanium Shape Memory Alloy

In vitro corrosion behavior of nano-multilayered TiN/Ti coated NiTi alloy

Anticorrosive and Antibacterial Evaluation of ZnO Nanoscale Sheets Electrosynthesized onto Ti6Al4V and Nitinol Alloys Previously Modified by Chemical Oxidation in H2O2

The Performance of Zn-Ni Alloy Coating Electrodeposited from Stabilized Bath

In Vitro Corrosion Inhibition on Biomedical Shape Memory Alloy by Plasma-Polymerized Allylamine Film

Corrosion Properties of Ti-Nb-Sn Alloys Prepared by Mechanical Alloying

Silver and Copper Coating Effects on Surface Morphology, Crystal Structure and Corrosion Behavior of NiTinol Shape Memory Alloy Plate

Enhanced Corrosion Resistance of Zr Coating on Biomedical Tini Alloy Prepared by Plasma Immersion Ion Implantation and Deposition

Electrochemical Stability of Orthopedic Porous NiTi Shape Memory Alloys Treated by Different Surface Modification Techniques

The electrochemical behavior of a Ti50Ni47Fe3 shape memory alloy