Abstract:We demonstrate an in-line all-silicon optical power monitor at near-infrared wavelengths which is able to identify the optical powers of different modes multiplexed in a silicon multimode waveguide. The device is a 12-μm-wide slab waveguide embedded with three PN junctions which can produce photocurrents through various sub-bandgap absorption mechanisms. The positions of these PN junctions are well engineered so that their photocurrents in response to the hybrid mode are distinctly different. A theoretical model is built to describe the nonlinear relationship between the optical powers of multiplexed modes and the photocurrents of different PN junctions. Based on the model, the fabricated device can simultaneously extract the powers of multiplexed TE0, TE1 and TE2 modes. Specifically, the minimum detectable powers for TE0/TE1/TE2 modes are 2.22/1.83/1.17μW, respectively, while the absolute percentage measurement errors are less than 8.9%/5.6%/6.1%. As the wavelength sweeps from 1500 nm to 1570 nm, the variation ranges of the photocurrents are less than 5%. Furthermore, we study two scenarios in which the linear approximation can be used to accelerate the optical powers calculation speed, i.e., the low-power mode in which the nonlinear photocurrent component is neglectable, and the small-signal mode in which the fluctuation amplitudes of optical powers are very weak. The absolute percentage measurement errors for TE0/TE1/TE2 modes are less than 12.8%/11.5%/21.9% and 4.8%/4.5%/2.5% in these two scenarios.

Different-Mode Power Splitters for Optical Testing of Three-Channel and Dual-Mode Waveguide Crossing

Design of MMI Double-wavelength Optical Power Splitters

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Different-mode power splitters based on a multi-dimension direct-binary-search algorithm

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

A Wavelength-Insensitive All-Silicon In-Line Optical Power Monitor for Multimode Silicon Photonics

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Ultra-compact and Broadband Polarization-Insensitive Mode-Order Converting Power Splitter

MULTI-MODE INTERFERENCE POWER SPLITTER IN GaAs FOR OPTICAL COMMUNICATION

Co-planar arbitrary ratio optical power splitter based on cascaded hybrid-core vertical directional couplers for arbitrary guide modes

Multimode-Waveguide-Based Optical Power Splitters in Glass

Study and fabrication of multimode interference GaAs optical power splitter

Optimization of MMI Optical Power Splitter Using Discrete Spectral Index Method

Ultracompact 2 $\,\times\,$ 2 Photonic Crystal Waveguide Power Splitter Based on Self-Imaging Effect Realized by Asymmetric Interference

Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

Waveguide Mode Splitter Based on Multi-mode Dielectric-Loaded Surface Plasmon Polariton Waveguide

Three-mode All-Optical (de)multiplexing on a SOI Chip

Ultra-broadband On-Chip Multimode Power Splitter with an Arbitrary Splitting Ratio

Silicon Two-Mode Multi/demultiplexer Based on Tapered Couplers