Abstract:Atmospheric pollution is one of the biggest concerns for public health. Air quality monitoring is currently performed by expensive and cumbersome monitoring stations. For this reason, they are sparse, and therefore, inadequate to provide enough accurate information on the personal exposure to pollutant gases. The current worldwide trend to address this issue consists in the use of low-cost small gas sensors, already available on the market, with a wide range of costs and performances. However, the performance of these sensors is heavily affected by the environmental conditions of the specific location used for their deployment. For this reason, it is of fundamental importance to test them in real-world scenarios. Field evaluation of sensor performance could be a challenging task because, on the one hand, they have heterogeneous output signals, and on the other hand, there is no widely shared evaluation protocol. The SentinAir system has been designed and developed to facilitate this task. It can carry out performance evaluations for any type of sensor thanks to its configurable and adaptable sensing capability, multiple wireless sensor network compatibility, flexibility, and usability. In order to evaluate SentinAir capabilities and functionalities, the performances of CO 2 , NO 2 , and O 3 sensors were tested in real-world scenarios against reference instruments. To the best of our knowledge, there is no previous study providing information about the performance of SP-61 (O 3 sensor), IRC-A1 (CO 2 sensor), and TDS5008 (CO 2 sensor) achieved during on-field tests. On the contrary, results obtained by OXB431 (O 3 sensor) and NO2B43F (NO 2 sensor) are consistent with the ones shown in previous studies carried out in similar conditions. During validation tests, we have found R 2 = 0.507 for the best performing NO 2 sensor, and R 2 = 0.668 for the best O 3 sensor. Concerning the indoor experiment, the best CO 2 sensor performance showed an excellent R 2 = 0.995 . In conclusion, the effectiveness of this tool in evaluating the performance of heterogeneous gas sensors in different real-world scenarios has been demonstrated. Therefore, we anticipate that the use of SentinAir will facilitate researchers to carry out these challenging tasks.

Novel Chemoresistive Sensors for Indoor CO 2 Monitoring: Validation in an Operational Environment

Low-cost carbon dioxide concentration sensors for assessing air quality in the built environment: an on-site evaluation of their measurement performance

Chemiresistive Sensor for Enhanced CO 2 Gas Monitoring

Optical portable instrument for the determination of CO2 in indoor environments

Design and Development of a Flexible, Plug-and-Play, Cost-Effective Tool for on-Field Evaluation of Gas Sensors

High Performance Colorimetric Carbon Monoxide Sensor for Continuous Personal Exposure Monitoring.

A Novel Wireless Wearable Volatile Organic Compound (Voc) Monitoring Device With Disposable Sensors

High selectivity and sensitivity through nanoparticle sensors for cleanroom CO2detection

A Wireless Gas Sensor Network to Monitor Indoor Environmental Quality in Schools

Room temperature sensing of volatile organic compounds using hybrid SnO nanoflower and Laser-Induced Graphitic carbon devices

A Monolithic Nano-Scale Sensor Architecture with Tuneable Gas Diffusion for Molecular Fingerprinting

A Distributed IoT Air Quality Measurement System for High-Risk Workplace Safety Enhancement

A Wearable Device to Monitor the Partial Pressure of Transcutaneous Carbon Dioxide

Multi-Sensor Device for Traceable Monitoring of Indoor Environmental Quality

Breakthroughs in the Design of Novel Carbon-Based Metal Oxides Nanocomposites for VOCs Gas Sensing

Carbon Functionalized Mesoporous Silica-Based Gas Sensors for Indoor Volatile Organic Compounds

A Colorimetric Chemical Sensing Platform for Real-Time Monitoring of Indoor Formaldehyde

Colorimetry-based System for Gaseous Carbon Dioxide Detection

Monitoring and Ensuring Worker Health in Controlled Environments Using Economical Particle Sensors

A Review of Gas Sensors for CO2 Based on Copper Oxides and Their Derivatives

Integration and Testing of Novel MOX Gas Sensors for IoT-based Indoor Air Quality Monitoring