Abstract:Many low-cost particle sensors are available for routine air quality monitoring of PM 2.5 , but there are concerns about the accuracy and precision of the reported data, particularly in humid conditions. The objectives of this study are to evaluate the Sensirion SPS30 particulate matter (PM) sensor against regulatory methods for measurement of real-time particulate matter concentrations and to evaluate the effectiveness of the Intelligent Air TM sensor pack for remote deployment and monitoring. To achieve this, we co-located the Intelligent Air TM sensor pack, developed at Clemson University and built around the Sensirion SPS30, to collect data from July 29, 2019, to December 12, 2019, at a regulatory site in Columbia, South Carolina. When compared to the Federal Equivalent Methods, the SPS30 showed an average bias adjusted R 2 = 0.75, mean bias error of −1.59, and a root mean square error of 2.10 for 24-hour average trimmed measurements over 93 days, and R 2 = 0.57, mean bias error of −1.61, and a root mean square error of 3.029, for 1-hr average trimmed measurements over 2300 hours when the central 99% of data was retained with a data completeness of 75% or greater. The Intelligent Air TM sensor pack is designed to promote long-term deployment and includes a solar panel and battery backup, protection from the elements, and the ability to upload data via a cellular network. Overall, we conclude that the SPS30 PM sensor and the Intelligent Air TM sensor pack have the potential for greatly increasing the spatial density of particulate matter measurements, but more work is needed to understand and calibrate sensor measurements. Implications: This work adds to the growing body of research that indicates that low-cost sensors of particulate matter (PM) for air quality monitoring has a promising future, and yet much work is left to be done. This work shows that the level of data processing and filtering effects how the low-cost sensors compare to existing federal reference and equivalence methods: more data filtering at low PM levels worsens the data comparison, while longer time averaging improves the measurement comparisons. Improvements must be made to how we handle, calibrate, and correct PM data from low-cost sensors before the data can be reliably used for air quality monitoring and attainment.

Monitoring and Ensuring Worker Health in Controlled Environments Using Economical Particle Sensors

Low-cost PM2.5 Sensors: an Assessment of Their Suitability for Various Applications

Evaluation of a new low-cost particle sensor as an internet-of-things device for outdoor air quality monitoring

Laboratory and field evaluation of a low-cost optical particle sizer

Suitability of Low-Cost PM2.5 Sensors for Monitoring Ambient Concentrations

An Investigation on the Possible Application Areas of Low-Cost PM Sensors for Air Quality Monitoring

Low Cost Sensor Network for Indoor Air Quality Monitoring in Residential Houses: Lab and Indoor Tests of Two PM Sensors

Long-Term Characterization of Indoor Air Quality at a Research Area Building: Comparing Reference Instruments and Low-Cost Sensors

Laboratory Evaluation and Calibration of Three Low-Cost Particle Sensors for Particulate Matter Measurement

Design and evaluation of a portable PM2.5 monitor featuring a low-cost sensor in line with an active filter sampler

On-field test and data calibration of a low-cost sensor for fine particles exposure assessment

Feasibility Study on the Use of NO2 and PM2.5 Sensors for Exposure Assessment and Indoor Source Apportionment at Fixed Locations

A System Based on the Internet of Things for Real-Time Particle Monitoring in Buildings

Application of the low-cost sensing technology for indoor air quality monitoring: A review

Field Evaluation of Low-Cost Particulate Matter Sensors in Beijing.

Comparative Study on the Use of Some Low-Cost Optical Particulate Sensors for Rapid Assessment of Local Air Quality Changes

Low-cost Coarse Airborne Particulate Matter Sensing for Indoor Occupancy Detection.

Influence of Particle Properties and Environmental Factors on the Performance of Typical Particle Monitors and Low-Cost Particle Sensors in the Market of China

Use of Low-Cost Sensors to Study Atmospheric Particulate Matter Concentrations: Limitations and Benefits Discussed through the Analysis of Three Case Studies in Palermo, Sicily

Evaluating the Feasibility of a Personal Particle Exposure Monitor in Outdoor and Indoor Microenvironments in Shanghai, China.

Review of the Performance of Low-Cost Sensors for Air Quality Monitoring