Abstract:Background: Accurate and portable respiratory parameter measurements are critical for properly managing chronic obstructive pulmonary diseases (COPDs) such as asthma or sleep apnea, as well as controlling ventilation for patients in intensive care units, during surgical procedures, or when using a positive airway pressure device for sleep apnea. Objective: The purpose of this research is to develop a new nonprescription portable measurement device that utilizes relative humidity sensors (RHS) to accurately measure key respiratory parameters at a cost that is approximately 10 times less than the industry standard. Methods: We present the development, implementation, and assessment of a wearable respiratory measurement device using the commercial Bosch BME280 RHS. In the initial stage, the RHS was connected to the pneumotach (PNT) gold standard device via its external connector to gather breathing metrics. Data collection was facilitated using the Arduino platform with a Bluetooth Low Energy connection, and all measurements were taken in real time without any additional data processing. The device's efficacy was tested with 7 participants (5 men and 2 women), all in good health. In the subsequent phase, we specifically focused on comparing breathing cycle and respiratory rate measurements and determining the tidal volume by calculating the region between inhalation and exhalation peaks. Each participant's data were recorded over a span of 15 minutes. After the experiment, detailed statistical analysis was conducted using ANOVA and Bland-Altman to examine the accuracy and efficiency of our wearable device compared with the traditional methods. Results: The perfused air measured with the respiratory monitor enables clinicians to evaluate the absolute value of the tidal volume during ventilation of a patient. In contrast, directly connecting our RHS device to the surgical mask facilitates continuous lung volume monitoring. The results of the 1-way ANOVA showed high P values of .68 for respiratory volume and .89 for respiratory rate, which indicate that the group averages with the PNT standard are equivalent to those with our RHS platform, within the error margins of a typical instrument. Furthermore, analysis utilizing the Bland-Altman statistical method revealed a small bias of 0.03 with limits of agreement (LoAs) of -0.25 and 0.33. The RR bias was 0.018, and the LoAs were -1.89 and 1.89. Conclusions: Based on the encouraging results, we conclude that our proposed design can be a viable, low-cost wearable medical device for pulmonary parametric measurement to prevent and predict the progression of pulmonary diseases. We believe that this will encourage the research community to investigate the application of RHS for monitoring the pulmonary health of individuals.

A Wearable Device to Monitor the Partial Pressure of Transcutaneous Carbon Dioxide

A Patient-Ready Wearable Transcutaneous CO2 Sensor

Recent Technologies for Transcutaneous Oxygen and Carbon Dioxide Monitoring

Evaluation in Healthy Subjects of a Transcutaneous Carbon Dioxide Monitoring Wristband during Hypo and Hypercapnia Conditions

Demonstrating the Analytical Potential of a Wearable Microneedle-Based Device for Intradermal CO 2 Detection

Air-permeable redox mediated transcutaneous CO2 sensor

Continuous Critical Respiratory Parameter Measurements Using a Single Low-Cost Relative Humidity Sensor: Evaluation Study

Real-time human respiration carbon dioxide measurement device for cardiorespiratory assessment

Towards a Miniaturized Photoacoustic Sensor for Transcutaneous CO2 Monitoring

Wearable Multisensor Ring-Shaped Probe for Assessing Stress and Blood Oxygenation: Design and Preliminary Measurements

Carbon Dioxide Sensing—Biomedical Applications to Human Subjects

Dynamic Modeling of Carbon Dioxide Transport through the Skin Using a Capnometry Wristband

Comparison of Transcutaneous and Capillary Measurement of PCO2 in Hypercapnic Subjects

High Performance Colorimetric Carbon Monoxide Sensor for Continuous Personal Exposure Monitoring.

Ultra-compact dual-channel integrated CO2 infrared gas sensor

An ultra-small integrated CO2 infrared gas sensor for wearable end-tidal CO2 monitoring

Reflective Oxygen Saturation Monitoring at Hypothenar and Its Validation by Human Hypoxia Experiment

Real-time Monitoring of Blood Carbon Dioxide Tension by Fluorosensor

A New Real-Time and Precision Capnography for Human Respiration Carbon Dioxide Concentration

Low-cost carbon dioxide concentration sensors for assessing air quality in the built environment: an on-site evaluation of their measurement performance

Vital parameter monitoring in harsh environment by the MedSENS in-ear multisensor device