Abstract:To verify the effect of oxygen vacancy on gas sensitivity, we have systematically investigated the gas-sensing performance of copper oxide/substoichiometric tungsten oxide (CuO/WO3-x) nanocomposite sensors. Oxygen deficiency in WO3-x facilitates the reaction of hydrogen sulfide (H2S) gas with chemisorbed oxygen species (i.e., O2-, O-, and O2-) at low temperature. The oxygen/sulphur exchange reaction between CuO and H2S in the sensing process can achieve room temperature operation of gas sensors. After the WO3-x nanorods were modified by a low content of CuO nanoparticles (Cu:W = 1:20), the sensors present an n-type sensing behavior. Their best working temperatures drop from 289 °C (or 386 °C) to 99 °C (or 70 °C) at which the responses are improved by 14 to 163 times for different x values. Among them, CuO(L)/W5O14 shows the highest sensitivity of 1575.7 to 10 ppm H2S at 99 °C and 171.5 to 10 ppm H2S at room temperature. Once WO3-x were loaded with a high concentration of CuO nanoparticles (Cu:W = 1:2), they exhibit a p-type behavior, and the optimal working temperatures reduce suddenly to room temperature at which CuO(H)/W18O49 displays the most sensitive response of 7.2 even toward trace amounts of H2S as low as 100 ppb. In addition, p-type CuO weakens the metal-like characteristics of W18O49 and such weakening effect enhances with an increase in the CuO content. Therefore, the sensing performance of the CuO/W18O49 composite is the best among the four CuO/WO3-x sensors. The two designs for low and high Cu/W molar ratios all achieve enhanced room-temperature H2S gas response, with a fast recovery time of ∼60 s under heating pulse, as well as an excellent selectivity, which makes the sensors a promising candidate for practical applications. Moreover, the micro-Raman spectra confirmed CuS formation and the thermal effect on the decomposition of CuS in the sensing process was studied.

Highly sensitive and stable room-temperature gas sensors based on the photochemically activated p-type CuAlO 2 thin films

Highly sensitive and stable room-temperature gas sensors based on the photochemically activated p-type CuAlO2 thin films

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO 3– x Modified with CuO

UV-induced Desorption of Oxygen at the TiO2 Surface for Highly Sensitive Room Temperature O2 Sensing

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO3-x Modified with CuO.

Employing Thermal Oxidation and Through-Silicon Via Technologies in CuO-Based Sensors for Room-Temperature NO2 Detection

Exploiting Free-Standing p-CuO/n-TiO 2 Nanochannels as a Flexible Gas Sensor with High Sensitivity for H 2 S at Room Temperature

UV-activated SnO 2 thin film for air-atmospheric oxygen sensing at room temperature

Fabrication of a Single CuO Nanowire-based Gas Sensor Working at Room Temperatur

Design of P–p Heterojunctions Based on CuO Decorated WS2 Nanosheets for Sensitive NH3 Gas Sensing at Room Temperature

Temperature-modulated UV-Enhanced SnO2 Gas Sensor Cell with High-Stability and High-Selectivity Gas Discrimination

Visible Light-Activated Room Temperature NH3 Sensor Base on CuPc-loaded ZnO Nanorods

Photochemical Sensitive Study of Au@CuO Flower-Like Materials

3D substoichiometric MoO3−x/EGaln framework for room temperature NH3 gas sensing

Efficient room temperature carbon dioxide gas sensor based on barium doped CuO thin films

Selective detection of trace carbon monoxide at room temperature based on CuO nanosheets exposed to (111) crystal facets

UV-activated CH 4 gas sensor based on Pd@Ni/ZnO microspheres

Sensitive and selective ozone sensor based on CuCo2O4 synthesized by a facile solution combustion method

UV-assisted room-temperature chemiresistive NO2 sensor based on TiO2 thin film

Preparation of CuO Nanowires by Simple Thermal Oxidation and Their Gas-Sensing Property

Room temperature triethylamine gas sensor with excellent performances based on novel porous CuO foam via a simple and facile route