Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Compact and low phase-noise dual-frequency oscillator based on dual-band filter with multiple coupling technique

A Low-Phase-Noise UHF-Band Fractional-N Frequency Synthesizer

A Low Phase Noise VCO with Placement Reordered Cores and High-Q Bond Wire Array Inductors

Ultra‐low Phase Noise Oscillator Employing Mixed Electric and Magnetic Coupling Resonator

Low Phase Noise Concurrent Dual-Band Oscillator Using Compact Diplexer

A SIW-based concurrent dual-band oscillator

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

Low Phase Noise Microwave Oscillator with Greater Than 60 Db Second‐harmonic Suppression

A frequency-doubling optoelectronic oscillator based on phase modulator

Low Phase Noise L‐band Oscillators Based on Novel General Chebyshev Bandpass Filters

A Low-Phase-Noise Wide-Tuning-Range Mode-Switching Oscillator Using Multi-Magnetic-Coupling and Active-Source-Degenerating Techniques

A 169.6-Ghz Low Phase Noise and Wideband Hybrid Mode-Switching Push–Push Oscillator

Low phase noise and wide tuning range VCO using switchable weakly coupled VCO-cores

A Low Phase Noise Planar Oscillator Using Compact Quarter-Wavelength Step-Impedance Resonators with Mixed Electrical and Magnetic Coupling

A Low Noise Self-Mixing-VCO Based on Coupled Class-F<sub>2</sub> Oscillators

A Class-C Eight-Phase Voltage-Controlled Oscillator With 184.2 dBc/Hz FoM and Loop-Based Superharmonic Coupling in 65nm CMOS

X-Band Low-Phase Noise Oscillator Employing Substrate Integrated Waveguide Dual-Mode Filter

A Low Noise Self-Mixing-VCO Based on Coupled Class-F 2 Oscillators

A 2-D Mode-Switching Quad-Core Oscillator Using E-M Mixed-Coupling Resonance Boosting

An 8.2 GHz triple coupling low-phase-noise class-F QVCO in 65nm CMOS.

Substrate-Suspended Air Cavity Resonator and Its Application in Low Phase Noise Oscillator