Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Dual-Band Quad-Core Transformer Coupled Vco with Phase Noise Optimization

A Ku-Band 20.4% Tuning Range VCO with a Tunable Harmonic-Resonant Transformer in 55 Nm CMOS

A Low Phase Noise VCO with Placement Reordered Cores and High-Q Bond Wire Array Inductors

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

A 2.9-to-7.2 GHz Dual-Core Quad-Mode VCO Achieving 206.5dbc/hz FoMT in 55nm CMOS

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

A Low-Phase-Noise Quad-Core Millimeter-Wave Fundamental VCO Using Circular Triple-Coupled Transformer in 65-Nm CMOS

A 31–46 GHz Dual-Core Class-C VCO Using Switchable Transformers in 28-Nm CMOS

Transformer-based Varactor-Less 96ghz–110ghz VCO and 89ghz–101ghz QVCO in 65nm CMOS

A Two-Story Quad-Core Dual-Mode VCO in 65-Nm CMOS

A 12.5-to-15.4ghz, -118.9Dbc/hz PN at 1mhz Offset, and 191.0dbc/hz FoM VCO with Common-Mode Resonance Expansion and Simultaneous Differential 2Nd-Harmonic Output Using a Single Three-Coil Transformer in 65nm CMOS.

A 4.5-to-13.5-ghz Single-Transformer Quad-Mode VCO with 202.5-Dbc/hz FoM $_{\Mathrm{t}}$

Low phase noise and wide tuning range VCO using switchable weakly coupled VCO-cores

A 12.9-to-24 GHz Dual-Mode Multi-Coil VCO Achieving 199.2 Dbc/hz Peak FoMT in 65-Nm CMOS

A Low Phase Noise 8.8 GHz VCO Based on ISF Manipulation and Dual-Tank Technique

Design of a Low-Phase-Noise 70-/105-GHz Dual-Band VCO With Common Mode Resonance Expansion

A 2.8-to-7.3 GHz Quad-Mode QVCO Achieving 205.9 Dbc/hz FoMTA in 55nm CMOS

A Quadrature VCO with Phase Noise Optimization for Wide Tuning Triple Band Frequency Generation

A Low-Phase-Noise VCO with Common-Mode Resonance Expansion and Intrinsic Differential 2Nd-Harmonic Output Based on a Single Three-Coil Transformer

A Compact and Low Phase Noise Square-Geometry Quad-Core Class-F VCO Using Parallel Inductor-Sharing Technique

A Wide Tuning Range Dual-Core Quad-Mode Orthogonal-Coupled VCO With Concurrently Dual-Output Using Parallel 8-Shaped Resonator