Abstract:Basalt fiber-reinforced polymer (BFRP) reinforced concrete is a new alternative to conventional steel-reinforced concrete due to its high tensile strength and corrosion resistance characteristics. However, as BFRP is a brittle material, unexpected failure of concrete structures reinforced with BFRP may occur. In this study, the damage initiation and progression of BFRP-reinforced concrete slabs were monitored using the acoustic emission (AE) method as a structural health monitoring (SHM) solution. Two simply supported slabs were instrumented with an array of AE sensors in addition to a high-resolution camera, strain, and displacement sensors and then loaded until failure. The dominant damage mechanism was concrete cracking due to the over-reinforced design and adequate BFRP bar-concrete bonding. The AE method was evaluated in terms of identifying the damage initiation, progression from tensile to shear cracks, and the evolution of crack width. Unsupervised machine learning was applied to the AE data obtained from the first slab testing to develop the clusters of the damage mechanisms. The cluster results were validated using the k-means supervised learning model applied to the data obtained from the second slab. The accuracy of the K-NN model trained on the first slab was 99.2% in predicting three clusters (tensile crack, shear crack, and noise). Due to the limitation of a single indicator to characterize complex damage properties, a Statistical SHapley Additive exPlanation (SHAP) analysis was conducted to quantify the contribution of each AE feature to crack width. Based on the SHAP analysis, the AE duration had the highest correlation with the crack width. The cumulative duration of the AE sensor near the crack had close to 100% accuracy to track the crack width. It was concluded that the AE sensors positioned at the mid-span of slabs can be used as an effective SHM solution to monitor the initiation of tensile cracks, sudden changes in structural response due to major damage, damage evolution from tensile to shear cracks, and the progression of crack width.

Acoustic emission detection and prediction of fatigue crack propagation in composite patch repairs using neural network

Prediction Model of Residual Load-Bearing Capacity of Composite Laminates Using Deep Learning

A Deep Learning Method for Damage Prognostics of Fiber-Reinforced Composite Laminates Using Acoustic Emission

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Prediction of Fatigue Crack Damage Using In-Situ Scanning Electron Microscopy and Machine Learning

The Effect of Patch Geometry on the Static and Fatigue Behaviors of Defective Aluminum Panels Repaired with A Composite Patch

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Fatigue crack size evaluation using acoustic emission signals for wire and arc additive manufactured material

Prediction of fatigue crack growth in steel bridge components using acoustic emission

Damage detection and classification of carbon fiber-reinforced polymer composite materials based on acoustic emission and convolutional recurrent neural network

Crack detection and classification of repaired concrete beams by acoustic emission monitoring

Comparative Study of Neural Network–Based Models for Fatigue Crack Growth Predictions of Short Cracks

Artificial neural network prediction of residual compressive strength of composite stiffened panels with open crack

Acoustic emission approach for identifying fracture mechanisms in composite bonded Joints: A study on varying Substrate's stacking sequence

Experimental Study on Monitoring Damage Progression of Basalt-FRP Reinforced Concrete Slabs Using Acoustic Emission and Machine Learning

Acoustic Emission Based Monitoring of Fatigue Damage in CFRP-CFRP Adhesive Bonded Joints

Clustering of acoustic emission signals after evaluation via analog modulations of a hybrid neural network for the study of crack propagation

Residual Strength Prediction of Aluminum Panels with Multiple Site Damage Using Artificial Neural Networks

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques