Abstract:Abstract. Composite materials are frequently used due to light weight and high stiffness. However, the use of composite materials is limited due to several micro-mechanical damage mechanisms, which are currently not well understood. Therefore, Acoustic Emission (AE) is frequently suggested for in-situ diagnosis of composite materials in Structural Health Monitoring. Elastic stress waves in the ultrasound regime are recorded using highly sensitive measurement equipment. Based on suitable analysis and interpretation of the waveform data, different micro-mechanical damage mechanisms such as delamination or fiber breakage can be distinguished. Frequently, data-driven approaches are suggested for classification of AE data. In literature, attenuation of AE due to wave propagation is currently the main limiting factor in AE-based diagnosis. In particular, AE is strongly attenuated in composite materials due to dispersion as dominant attenuation mechanism. Furthermore, depending on the source location, which is usually not known a-priori, different propagation paths are obtained in practice. Therefore, the effect of wave propagation on AE is important and can not be neglected to achieve reliable classification. However, the effect of different propagation paths on the classification performance is often not considered explicitly. Due to dependence of wave propagation behavior on waveform characteristics (e.g. frequency), it can be expected that the impact of wave propagation on AE classification performance depends also on the related source mechanism. Therefore, it is worth to study how classification performance of different source mechanisms is effected by wave propagation. In this paper, the dependence of the classification performance on different propagation distances is experimentally investigated in detail. To achieve highly reproducible AE measurements, different artificial AE sources are induced using surface mounted piezo elements. The corresponding waveforms are measured at two different locations. For classification, a convolutional neural network-based classification scheme is established. The pre-trained AlexNet architecture is fine-tuned using measurements obtained using different excitation signals. The classification performance is evaluated with particular focus on the impact of wave propagation. The variations in propagation distance have a strong impact on the classification performance. As main conclusion for AE-based SHM it can be stated that variations in the propagation path should be considered. Furthermore, the underlying source mechanisms should be taken into consideration for reliable performance estimation.

Clustering of acoustic emission signals after evaluation via analog modulations of a hybrid neural network for the study of crack propagation

Diagnosis of Damage Evolution Process for Asphalt Mixtures Using Pattern Recognition with Acoustic Emission Signals

Quantitative Investigation of Acoustic Emission Waveform Parameters from Crack Opening in a Rail Section Using Clustering Algorithms and Advanced Signal Processing

Acoustic Emission and Artificial Intelligence Procedure for Crack Source Localization

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Acoustic emission detection and prediction of fatigue crack propagation in composite patch repairs using neural network

Detection of Cracking Levels in Brittle Rocks by Parametric Analysis of the Acoustic Emission Signals

Crack Pattern Recognition Based on Acoustic Emission Waveform Features

Acoustic Emission-Based Diagnosis Using AlexNet: How Wave Propagation Effects Classification Performance

Shale Crack Identification Based on Acoustic Emission Experiment and Wavenet Data Recovery

Automated crack identification in structures using acoustic waveforms and deep learning

Acoustic emission wave classification for rail crack monitoring based on synchrosqueezed wavelet transform and multi-branch convolutional neural network

Detection of cracks using neural networks and computational mechanics

A new method for determining the crack classification criterion in acoustic emission parameter analysis

Study of Acoustic Emission Signal Noise Attenuation Based on Unsupervised Skip Neural Network

A Proposed Algorithm Based on Variance to Effectively Estimate Crack Source Localization in Solids

The Research of Acoustic Emission Signal Classification

Damage Pattern Recognition and Crack Propagation Prediction for Crumb Rubber Concrete Based on Acoustic Emission Techniques

Automatic Crack Classification by Exploiting Statistical Event Descriptors for Deep Learning

Novel method for detecting weak acoustic emission signals based on the similarity of time-frequency spectra