Abstract:Acoustic emission (AE) is a non-destructive technique that relies on monitoring naturally occurring sources of high frequency ultrasound in components and structures. Ultrasonic waves propagate in the form of different wave modes—for instance Lamb waves in thin plates, or Rayleigh and P- and S- waves in bulk structures. Those wave modes have different properties, but also contain information regarding the source of the naturally occurring wave. Manually, the wave modes can be recognized by comparing a time–frequency representation of the signal to the dispersion curves expected in the tested object. For analyzing a large number of signals, this manual mode recognition becomes a tedious process. This paper proposes a method to automate the wave mode recognition based on some minimal knowledge of the occurring wave modes. As inputs, only the propagation speed of the possible wave modes and the source position need to be provided along with a limited set of reference wavelets for each wave mode. Cross-correlation of a signal with a reference wavelet of a mode reduces the signal to a limited number of peaks that may delineate the start of the mode. Using other signals from the same event but from different sensors, velocities are calculated for each peak in order to select the peak that corresponds to the arrival of the mode under investigation. To validate the method, a dataset was recorded based on four types of out-of-plane sources: Hsu-Nielsen sources of 0.3 and 0.5 mm, sensor pulse signals and AEs from melting ice. Since the presented dataset was recorded on a plate, the aim of the validation was to recognize the zero-order symmetrical and anti-symmetrical Lamb modes. The results of the proposed mode recognition method applied to this dataset are compared with results from manual mode recognition. For Hsu-Nielsen sources, the succes rate is found to be above 95%. For narrow-band pulsed signals or for AEs from melting ice with a low signal-to-noise ratio, succes rates between 75 and 80% relative to manual mode recognition are reported.

Novel method for detecting weak acoustic emission signals based on the similarity of time-frequency spectra

Evaluating Onset Times of Acoustic Emission Signals Using Histogram Distances

A novel feature representation method based on original waveforms for acoustic emission signals

AE feature extraction and signal representation model based on wavelet packet decomposition

A Novel Feature Representation Method Based on Similarity Between Statistical Distributions of Acoustic Emission Waveforms

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Feature Extraction of Acoustic Emission Signals Based on Fractal Dimension and Independent Component Analysis

Weak Signal Detection Using Multiscale Morphology in Microseismic Monitoring

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Interrelation analysis method of acoustic emission for failure prediction of brittle failure based on vibration mechanics

Response characteristics of acoustic emission signal and judgment criteria for different fracture modes

The Research of Acoustic Emission Signal Classification

An Acoustic Emission Activity Detection Method based on Short-Term Waveform Features: Application to Metallic Components under Uniaxial Tensile Test

Regularized Non-Stationary Morphological Reconstruction Algorithm for Weak Signal Detection in Microseismic Monitoring: Methodology

Clustering of acoustic emission signals after evaluation via analog modulations of a hybrid neural network for the study of crack propagation

Acoustic Emission and Artificial Intelligence Procedure for Crack Source Localization

Study on Spectrum Characteristics and Clustering of Acoustic Emission Signals from Rock Fracture

Crack Pattern Recognition Based on Acoustic Emission Waveform Features

A novel method for extracting mutation points of acoustic emission signals based on cosine similarity

A Method for Semi-automatic Mode Recognition in Acoustic Emission Signals

Method for the P-wave arrival pickup of rock fracture acoustic emission signals under strong noise