Abstract:In ceramic/metal brazing, high residual stress usually causes fracture in the ceramic substrates. Therefore, composite fillers consisting of ductile matrix featuring low yield strength and elastic modulus, as well as reinforcements featuring low coefficient of thermal expansion (CTE), are employed. However, for AgCuTi-base composite fillers, the reinforcements are likely to weaken the deformability of brazing seams (BS), i.e. increase the elastic modulus and yield stress of BS. To address this issue, we developed a new AgCu-base composite filler with "hedgehog-like" reinforcement clusters. Herein, AgCu + NbB2 composite filler was used to braze ZrB2-SiC and TC4-TiBw, wherein ductile Ag(s,s) and Cu(s,s) dominated BS, thereby ensuring high deformability; in addition, a NbB layer along with limited TiB whiskers was formed at the NbB2/brazes interface with the orientation relationship of (-11-1)NbB//(0-1-1)TiB and [-314]NbB//[12-2]TiB, resulting in "hedgehog-like" reinforcement clusters. This structure exhibited the following advantages: (i) crystallographic misfit at the interface of reinforcement clusters/brazes and the controlled formation of TiB whiskers minimised the conventional fine grain strengthening and dispersion strengthening effects of BS; (ii) isolated reinforcement clusters decelerated the increase in the elastic property of BS; (iii) "hedgehog-like" structure absorbed fracture energy by deflecting cracks; and (iv) the formation of brittle compounds could be avoided. In other words, the designed reinforcement clusters reduced the deformability expense and compensated for the mechanical-resistance of BS. Therefore, the maximum joint strength was obtained with 2 wt% NbB2, which increased the shear strength of the joint six times compared to that with 0 wt% NbB2. For the joints failing inside ceramic substrates, (i) the key factor for limiting joint strength was the residual stress inside ceramics and (ii) the remission of the trade-off between thermal expansion mismatch and deformability expense contributed to relaxing residual stress, thereby confirming the reliability of our design.

Controllable distribution of reinforcements for reducing the strain energy in dissimilar ceramic/metal joints

Design of Multi-Layered Architecture in Dissimilar Ceramic/metal Joints with Reinforcements Clustering Away from Both Substrates

Design of composite filler with hedgehog-like reinforcement clusters for effective stress relief in ceramic/metal joints

Relieving Residual Stress in Brazed Joint Between SiC and Nb Using a 3D-Sio 2 -Fiber Ceramic Interlayer

Interfacial microstructure and mechanical property of ZrC-SiC ceramic and TiAl joint brazed with AgZr active filler metal

Reinforcement of ceramic bonded joints with intermetallic compounds

Improvement for Ti3SiC2/Cu Joint Brazed Using Composite Fillers with Abnormal Expansion Ceramic Particulates

A Novel Method to Relieve Residual Stress in Dissimilar Brazed Joint Via Micro-Scale Additive Manufacturing

Improvement for Ti 3 SiC 2 /Cu joint brazed using composite fillers with abnormal expansion ceramic particulates

Solid-state Transformation Composite Filler: A New Strategy to Strengthen Ceramic/metal Joint

The Regulation Strategy for Releasing Residual Stress in Ceramic-Metal Brazed Joints

Interfacial Microstructure and Properties of In-situ TiB Reinforced ZrB2-SiC Joints

Brazing ZrO2 Ceramic and TC4 Alloy by Novel WB Reinforced Ag-Cu Composite Filler: Microstructure and Properties

A Study of the SiCf/SiC Composite/ni-Based Superalloy Dissimilar Joint Brazed with a Composite Filler

Microstructure and Mechanical Properties of the SiC/Nb Joint Brazed Using AgCuTi + B4C Composite Filler Metal

Strengthening the ZrC-SiC Ceramic and TC4 Alloy Brazed Joint Using Laser Additive Manufactured Functionally Graded Material Layers

Microstructural Evolution and Mechanical Properties of Zrb2-Sic/Cu/Ti/Ti6al4v Brazing Joints

A Concept of Regulating the Distribution of Continuous Brittle Phases by Spatial Division of the Ti3SiC2/Ti2AlNb Brazing Seam

Microstructure and mechanical properties of ZrB2-SiC joints fabricated by a contact-reactive brazing technique with Ti and Ni interlayers

Microstructure Evolution and Mechanical Properties of SiC/Mo Joint Brazed with FeCoCrNi High-Entropy Alloy Filler

C/SiC composite-Ti6Al4V joints brazed with negative thermal expansion ZrP2WO12 nanoparticle reinforced AgCu alloy