Abstract:There is an urgent need in surface mount technology (SMT) for a nontoxic, reusable and low temperature bonding technique which can afford good mechanical support as well as electrical contact. Meanwhile in the nanotechnology, many excellent and unique structure-related properties such as the high mechanical strength, the high conductivity and the adhesion ability of gecko feet have been studied. Our lab proposes a new patterned structure of Au nanowire array named nanowire surface fastener (NSF), which cold bonding for surface mount technology can be realized at room temperature. Then various methods have been developed to fabricate nanowire, such as arc discharge, catalytic CVD growth and template synthesis, and so on. Among these methods, the template method has been widely used for preparing one-dimensional nanostructures such as metals, semiconductors, polymers, and other materials by electrochemical, electroless deposition or sol-gel technique. Especially anodic aluminum oxide template assisted way has attached considerable attention due to its unique structure properties, such as controllable pore diameter, extremely narrow pore size distribution with high densities, high aspect ratios, and ideally cylindrical pore shape. The well arranged porous anodic aluminum oxide membrane is fabricated from aluminum film by two steps zM oxalic acid electrolytes. The anodic aluminum oxide membrane was investigated for features such as pore size, interpore distance, and thickness by 40 V. It is important for fabrication of porous anodic aluminum oxide template to find out elimination of the barrier layer of oxide and the pore extending rate by 0.5 M phosphoric acid. Morphologies of surface of aluminum film between anodization process and the anodic aluminum oxide barrier layer was researched by using atomic force microscope and scanning electron microscope. Results showed that the anodic aluminum oxide having the same diameter of the pore and the well arranged pore array without branching channel was obtained. The diameter of the pore before the pore extending treatment is 42 nm and the diameter of the pore after the pore extending treatment for 30 minutes is 86 nm. It was found that the diameter of the pore increased per 15 nm by the pore extending treatment for 10 minutes. We fabricated the through-hole anodic aluminum oxide template and made Cu nanowire by the template of our own making. By using Cu nanowire, we try to produce nanowire surface fastener and evaluate its properties.

Fabrication of Ordered Nanohole Arrays by Anodization of Sn Substrates with Ordered Dimple Patterns Formed Using Porous Alumina Template

Spontaneous Formation of Ordered Sn Nanodot Array on Porous. Anodic Alumina Membrane

Fabrication and Application of Alumina Nanoscale Ordered Array Template

Fabrication of Highly Ordered SnO2 Nanowire Arrays and Nanodevice

Fabrication of ordered SnO2 nanotube arrays via a template route

Fabrication and Structural Characterization of Large-Scale Uniform Sno2 Nanowire Array Embedded in Anodic Alumina Membrane

Preparation of Ordered Nanohole Arrays by Two-Step Anodization of Austenitic Stainless Steel Substrates

Electrodeposited Metal Sulfide Semiconductor Films with Ordered Nanohole Array Structures

Fabrication of Anodic Aluminum Oxide Template and Cu Nanowire Surface Fastener

Formation Mechanism of Alumina Nanotubes and Nanowires from Highly Ordered Porous Anodic Alumina Template

Growth of Highly-Ordered Metal Nanoparticle Arrays in the Dimpled Pores of an Anodic Aluminum Oxide Template

Fabrication of highly ordered nanoporous alumina films by stable high-field anodization

Synthesis Of Ordered Large-Scale Zno Nanopore Arrays

Self-organized Formation of Hexagonal Nanopore Arrays in Anodic Alumina

Hierarchical Structural Nanopore Arrays Fabricated by Pre-Patterning Aluminum Using Nanosphere Lithography.

Anodizing process of Al films on Si substrates for forming alumina templates with short-distance ordered 25 nm nanopores

Fabrication of Highly Porous and Micropatterned SnO2 Films by Oxygen Bubbles Generated on the Anode Electrode

Fabrication of hexagonally ordered nanopores in anodic alumina: An alternative pretreatment

Fabrication of Ordered Arrays of Polymethylmethacrylate Nanotube Using Porous Anodic Alumina As a Template

Fabrication of micro/nanoporous templates with a novel hierarchical structure by anodization of a patterned aluminum surface

Template‐Assisted Epitaxial Growth of Ordered SnO2 Nanorods Arrays with Different Hollow Structures for High‐Performance Sodium Storage