Abstract:As tellurides and selenides of Bismuth are extensively used thermoelectric materials in the low-temperature range with refrigeration application, A concerted effort is put forth to boost the ZT by co-doping the pristine Bi 2 Se 3 with antimony (Sb) on cation end and tellurium (Te) on anion side of the compound. The double sintered solid-state reaction method is employed in the preparation of Bi 2 Se 3 and (Bi 1− x Sb x ) 2 Se 2.7 Te 0.3 polycrystalline pellets, with x = 0.02, 0.04, and 0.06. The sample exhibits a rhombohedral structure with the space group of R m. FESEM and EDAX analysis are used to confirm surface morphology and elemental composition of the produced samples. The thermoelectric measurements for the pristine and co-doped samples were conducted by the physical property measurement system as well as a considerable increase in the Seebeck coefficient of − 115 μV/K is observed for 0.02 doping of the Sb which is 4.2 times greater than as for pristine (S = − 28 μV/K). Higher concentration doping ( x = 0.04, 0.06) has not reflected any Seebeck coefficient advancement. In contrast, the lowest total thermal conductivity at a low-temperature regime (< 50 K) is observed for x = 0.06 doping concentration which at near room temperature increases beyond the pristine thermal conductivity; whereas, x = 0.02, 0.04 doping concentration shows a decrement in total thermal conductivity at low, at room temperature region the values are almost equivalent to that of pristine. The co-doped samples' electrical resistivity is substantially less than pristine sample. The highest power factor of 3 × 10 –4 μW/mK 2 is obtained for the x = 0.02 sample. The highest ZT value for the x = 0.02 sample is almost 28 times more than a pristine sample. We conducted a study where we combined experimental and DFT methods to investigate thermoelectric properties incorporated into pristine and doped with antimony and tellurium on Bi 2 Se 3 . We have employed this combination to investigate the partial density of states, Seebeck coefficient, power factor using the Boltzmann transport equation. Theoretical thermoelectric data were derived and compared to experimental observations. Hence, using combined experimental and theoretical investigations helps to predict with higher accuracy of thermoelectric properties of semiconducting materials.

Effect of Bi3+, Ti4+ and Ta5+ doping on the thermoelectric properties of KSr2Nb5O15: A first-principles investigation

First-principles Calculations and High Thermoelectric Performance of La–Nb Doped SrTiO3ceramics

High thermoelectric performance of Nb-doped SrTiO3 bulk materials with different doping levels

Effect of Ag+ doping and Ag addition on the thermoelectric properties of KSr2Nb5O15

Effect of La3+, Ag+ and Bi3+ doping on thermoelectric properties of SrTiO3: First-principles investigation

Record High Thermoelectric Performance in Bulk SrTiO3 Via Nano-Scale Modulation Doping

Effect of Bi3+ Doping on the Electronic Structure and Thermoelectric Properties of (Sr0.889-xLa0.111Bix)TiO2.963: First-Principles Calculations

Doping Achieves High Thermoelectric Performance in SnS: A First-Principles Study

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Tuning the Thermoelectric Properties of Ca9zn4+Xsb9 by Controlled Doping on the Interstitial Structure

Realizing widespread resonance effects to enhance thermoelectric performance of SnTe

Nanostructuring and band engineering boosting thermoelectric performance of Bi-Sb-Te alloys via CsBr doping

Effect of Antimony Doping on Thermoelectric Properties of Zr0.5Ti0.5Sn Multi-Element Alloys

The effects of tungsten doping on the thermoelectric properties of Bi2O2Se

Enhanced Thermoelectric Performance of Stibium and Bismuth Co-Doped SnTe Via Melt Spinning

Enhancement of thermoelectric properties in Sr0.7Ba0.3Nb2O6−δ-based ceramics via nano-sized Ti as additive

Thermoelectric Performance Enhancement of (bis)1.2(tis2)2 Misfit Layer Sulfide by Chromium Doping

Highly Enhanced Thermoelectric and Mechanical Properties of Bi-Sb-Te Compounds by Carrier Modulation and Microstructure Adjustment

Enhanced thermoelectric performance in SnTe due to the energy filtering effect introduced by Bi2O3

Improvement in thermoelectric properties of Zn-Mn co-doped nanostructured SnTe through band engineering and chemical bond softening

A comprehensive experimental and DFT analysis on thermoelectric properties of Sb, Te co-doped Bi2Se3 polycrystals