Abstract:In this study, Na as the n‐type dopant is introduced in the polycrystalline Bi2Te3 material for enhancing the thermoelectric and mechanical properties. Benefitting from the synergistic optimization of electrical and thermal transport properties, a maximum ZT value of 1.03 is achieved at 303 K for the Bi2Te3‐0.25 wt% sample, which is 70% higher than that of the pristine sample. The recent growing energy crisis draws considerable attention to high‐performance thermoelectric materials. n‐type bismuth telluride is still irreplaceable at near room temperature for commercial application, and therefore, is worthy of further investigation. In this work, nanostructured Bi2Te3 polycrystalline materials with highly enhanced thermoelectric properties are obtained by alkali metal Na solid solution. Na is chosen as the cation site dopant for n‐type polycrystalline Bi2Te3. Na enters the Bi site, introducing holes in the Bi2Te3 matrix and rendering the electrical conductivity tunable from 300 to 1800 Scm–1. The solid solution limit of Na in Bi2Te3 exceeds 0.3 wt%. Owing to the effective solid solution, the Fermi level of Bi2Te3 is properly regulated, leading to an improved Seebeck coefficient. In addition, the scattering of both charge carriers and phonons is modulated, which ensured a high‐power factor and low lattice thermal conductivity. Benefitting from the synergistic optimization of both electrical and thermal transport properties, a maximum figure of merit (ZT) of 1.03 is achieved at 303 K when the doping content is 0.25 wt%, which is 70% higher than that of the pristine sample. This work disclosed an effective strategy for enhancing the performance of n‐type bismuth telluride‐based alloy materials.

Enhanced thermoelectric performance in SnTe due to the energy filtering effect introduced by Bi2O3

Promoting SnTe As an Eco‐Friendly Solution for P‐pbte Thermoelectric Via Band Convergence and Interstitial Defects

Enhanced thermoelectric performance at elevated temperature via suppression of intrinsic excitation in p-type Bi0.5−xSnxSb1.5Te3 thermoelectric material

Enhanced Thermoelectric Performance of Stibium and Bismuth Co-Doped SnTe Via Melt Spinning

Enhanced thermoelectric performance of PbTe based materials by Bi doping and introducing MgO nanoparticles

Band convergence and nanostructure modulations lead to high thermoelectric performance in SnPb0.04Te-y% AgSbTe2

Enhanced Thermoelectric Performance of SnTe via Introducing Resonant Levels

Thermoelectric SnTe with Band Convergence, Dense Dislocations, and Interstitials Through Sn Self-Compensation and Mn Alloying.

Enhanced Thermoelectric Properties in the Counter-Doped SnTe System with Strained Endotaxial SrTe

Realizing widespread resonance effects to enhance thermoelectric performance of SnTe

Enhanced performance of Bi2Te3-based thermoelectric materials by incorporating Bi2Fe4O9 magnetic nanoparticles

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Enhanced Thermoelectric Performance of SnTe-Based Materials via Interface Engineering

Realizing High Thermoelectric Properties of SnTe Via Synergistic Band Engineering and Structure Engineering

Boosting Thermoelectric Performance of PbBi2Te4 Via Reduced Carrier Scattering and Intensified Phonon Scattering.

Enhancing Thermoelectric Performance of SnTe Via Stepwisely Optimizing Electrical and Thermal Transport Properties

Origin of improved average power factor and mechanical properties of SnTe with high-dose Bi2Te3 alloying

Extraordinary Role of Bi for Improving Thermoelectrics in Low-Solubility SnTe-CdTe Alloys.

Synergistical Enhancement of Thermoelectric Properties in N‐type Bi2O2Se by Carrier Engineering and Hierarchical Microstructure

Achieving higher thermoelectric performance of n-type PbTe by adjusting band structure and enhanced phonons scattering

Broadening the optimum thermoelectric power generation range of p-type sintered Bi0.4Sb1.6Te3 by suppressing bipolar effect